User's Manual

4. Select “BestGot BT6002” from the found Bluetooth devices. (If asked for a password
or PIN code, enter “0000”).
5. Once successfully paired and connected, you will hear “connected”.
Note: If pairing is not successful within 120 seconds, the blue and red light blinks and the
headphones are out of pairing mode. Please turn off the headphones and try pairing
again.

Turning the headphones on
Press and hold the MF Button until you hear “Power on” or you see the red and blue light
comes on.
Note: If the headphones have successfully paired to your device, simply turn on the
headphones to reestablish the Bluetooth connection. Not need to enter pairing mode.

Turning the headphones off
Press and hold the MF Button until you hear “Power off” or you see the red and blue light
comes on.

Connecting to 2 mobile phones
1. Move the headphones close to 2 mobile phones. The closer, the better.
2. Make sure the headphones have entered pairing mode. (See instruction “Entering
pairing mode”).
3. Go to Bluetooth settings on phone 1, turn on the Bluetooth feature, add or search
devices, select ”BestGot BT6002”.
4. Turn off the Bluetooth feature on phone 1, and turn off the headphones.
5. Make sure the headphones have entered pairing mode. (See instruction “Entering
pairing mode”).
6. Go to the Bluetooth settings on phone 2, turn on the Bluetooth feature, add or search
devices, select ”BestGot BT6002”.
7. Turn on the Bluetooth feature of phone 1, and the headphones will reconnect to
phone 1 automatically. (If automatic reconnecting fails, please Unpair/Forget this
device on phone 1. Turn off the headphones and try pairing again).

Reconnecting
1. Move the headphones close to your mobile phone. The closer, the better.
2. Simply turn on the headphones, no additional operation needed. When you see the
blue light blinks, the headphones are in reconnecting mode.
3. Turn on the Bluetooth feature of your phone, and the headphones will reconnect to
your phone automatically. Once successfully reconnecting, you will hear “Connected”.
Note: If automatic reconnecting fails, please Unpair/Forget this device on your phone.
Turn off the headphones and try pairing again.

Disconnecting the headphones from your phone
Turn off the headphones or turn off the Bluetooth feature on your phone.
Note: “in Bluetooth mode” means the headphones and your phone are
connected via Bluetooth.

To answer a call
When you hear a ringtone, there is an incoming call. To answer it: Press the MF
Button once.

To end a call