ASSEMBLY INSTRUCTION PRODUCT NAME： Convertible Writing Desk with Cabinet CUSTOMER SUPPORT CONTACT US BY: Know more about Bestier from PHONE： 888-666-1086 EMAIL：Service@bestier.net Thanks for choosing Bestier! Feel free to contact us if you need any help. Please kindly share your shopping experience with us on the platform if you are satisfied with it.
HELPFUL HINTS BEFORE YOU START CAUTION Inspect product packaging to ensure the appearance is good. Be cautious when using a power drill or power screwdriver. Read the assembly instruction carefully and follow it step by step. Please be aware to slow down and stop when screw is nearly tight. To avoid any scratching, putting a soft blanket on the floor is suggested. Do Not use any harsh chemicals or abrasive cleaners for this item. Push, pull or drag this item carefully.
PART LIST 1 2 X1 3 4 X1 5 X1 10 X1 X1 X1 X1 15 X3 16 X1 X1 X1 18 17 X1 13 12 14 X1 X1 9 11 X1 7 6 8 X1 19 X1 X1 D332M X2 03
20 22 21 X1 X1 24 23 25 X1 X1 X1 27 26 X1 28 X1 X1 29 X1 X1 ACCESSORY LIST PICTURE QTY CODE A 32+3 J 1 B 32+3 K 2 C 54+3 L 2 D 62+3 M 2 N E 1 1 P 14+1 Q 12+1 R 2 S 2 CODE F SIZE PICTURE SIZE QTY 1 G 5 H 20+1 D332M 1 04
※Before tightening screws, make sure "E" is parallel to the desk edge. ※When installing "E", pay attention to the direction of tabs.
4 10 7 13 12 B 6 C 3 11 8 5 13 13 24 23 B 16 C 16 22 14 C G 15 C G C G 2 G 3 D332M 06
B 14 B B C B C C C 12 B 4 C 4 12 14 12 10 10 14 G C B B 15 B 2 C G 4 G 2 D332M 07
9 16 C B B 4 C 6 B C 11 B 4 C 6 D332M 08
D H 19 25 26 27 21 1 18 D H 20 20 ※Install "A" on Part 28 first.
D 26 27 28 21 19 D 10 D C 25 1 25 1 18 20 18 20 19 19 C D 8 10 D332M 10
※Put the desk board over this frame, then tighten the screws.
STEP 15 ※Partially tighten Screw D. N D 2 D 2 N 1 STEP 16 ※Before tightening screws, make sure Part 2 is well aligned.
STEP 17 M D M D M 2 D 4 M D STEP 18 ※Two persons are needed. ※Person 1 needs to hold Part 17 and make sure it is well-aligned. Person 2 then start tightening Screw D: firstly, 4 screws at the top and bottom of Part 17; secondly, 6 screws at the left and right side. 17 ※Self-tapping screws: modest effort and strength for tightening is needed (or carefully use electric screwdrivers).
STEP 19 24 28 P P P 4 D332M 14
※Two persons needed in this step. ※For attaching Part 28 to Part 20, carefully put down the desk (as drawing shown) and install “R”.
29 K K K Q 2 Q 4 D332M 16
20 28 ※Two persons needed in this step. ※For attaching Part 28 to Part 20, carefully put down the desk (as drawing shown) and install “R”.
29 K K Q K Q 2 4 D332M 18
