Installation Manual

TrailMax™ II Sport Reclining High Back Bucket Seat – Installation Instructions

Rev. 3 0907 39434 / 39438 pg. 2

Parts List and

Hardware Identiﬁ cation

Install Plastic Covers

Seat Back,

Qty - 1

Orient the Plastic Covers with the brackets on the

seat. Press the covers ﬁ rmly onto the brackets.

Assemble Seat

Align the holes in the brackets on the

Seat Back with the holes in the Seat

Bottom. Install an M10 x 20 Bolt in

each hole. Tighten the bolts securely.

M8-1.25x25 Bolt, Qty - 4

Adjuster Knob,

Qty - 2

M10x20 Bolt, Qty - 4

Plastic Cover,

Rt., Qty - 1

Seat Bottom,

Qty - 1

Plastic Cover,

Lt., Qty - 1

Install Adjuster Knobs

Install an Adjuster Knob onto the pin on each side

of the seat. Press ﬁ rmly on the Knob until it snaps

into place.

M10 x 20 Bolts

Plastic

Cover

Adjuster

Knob

Make sure

Adjuster

Knob snaps

into place