User Guide

TrailMax™ II Sport Reclining High Back Bucket Seat – Installation Instructions
Seat Riser
Seat Track
Slide
Track Bar
Re-Install Nuts -
Tighten to 21 Ft/Lbs.
Re-Install Nuts -
Tighten to 21 Ft/Lbs.
Failure to tighten the bolts and nuts to the specifi ed
torque can result in the seat loosening, thereby
causing serious bodily injury to the vehicle occupants and to others.
Place the seat in the vehicle. Align the studs on the tracks with the holes in
the seat riser. Reinstall the four (4) nuts that were removed in Step One on the
track studs. Tighten the nuts to 21 ft/lbs, using a 13mm Wrench.
Install the Seat in the Vehicle
Rotate knob this
direction to tilt the
seat forward
Rotate knob this direction
to tilt the seat backward
Tilting the seat back to near horizontal could cause
interference to the rear wheel house and may cause
damage to the back of the seat.
Recliner Seat Function
For proper use of child seats in this vehicle, refer to the instructions
provided with the child seat and to the vehicle owners manual.
Never adjust the driver’s seat or seat back when
the vehicle is moving. You could loose control of the
vehicle and injure someone.
This seat system is intended to be used with seat belts at all times. Do not rely on the
seat to maintain the seating position of occupants, in the event of an accident.
Always drive and ride with your seat back upright and the lap belt snug across
the hips to reduce the risk of serious injury to the abdomen or neck that could be
caused by sliding under the seat belts in a collision.
Children should always ride with the seat back in the fully upright position. When
the seat back is not fully upright, there is a greater risk that the child will slide
under the safety belt and be seriously injured in a collision.
WEAR SEAT BELTS AT ALL TIMES
BESTOP RACING SEATS
AUTO SEATS