Installation Manual

ManualsBrandsBestop ManualsAutomotiveBestop 39451-01 TrailMax II Pro Black Crush All-Vinyl Front High Back Driver-Side Jeep Seat for 1976-2006 Jeep CJ and Wrangler

Installation Instructions

INSTALLATION TIME

SKILL LEVEL

1 Hour

2 - Moderately Easy

TOOLS

Vehicle Application

• All Jeep CJ5s, CJ7s and

Wranglers

1976 – 2002

Vinyl Seat

Part Number: 39450 (Right)

Part Number: 39451 (Left)

TrailMax™ II Pro Reclining

High Back Bucket Seat

www.Bestop.com - We’re here to help! Visit our web site and click on “Ask a Question”. Click here for more Jeep Accessories by Bestop.

13 mm

1997 – 2002 Vehicles must use Adapter Bracket Part Number 51256.

• All Jeep CJ5s, CJ7s and

Wranglers

1976 – 2002

Cloth Seat

Part Number: 39460 (Right)

Part Number: 39461 (Left)

Summary of content (5 pages)

PAGE 1
Installation Instructions TrailMax™ II Pro Reclining High Back Bucket Seat Vehicle Application • All Jeep CJ5s, CJ7s and Wranglers 1976 – 2002 Vinyl Seat Part Number: 39450 (Right) Part Number: 39451 (Left) • All Jeep CJ5s, CJ7s and Wranglers 1976 – 2002 Cloth Seat Part Number: 39460 (Right) Part Number: 39461 (Left) 1997 – 2002 Vehicles must use Adapter Bracket Part Number 51256. www.Bestop.com - We’re here to help! Visit our web site and click on “Ask a Question”.
PAGE 2
TrailMax™ II Pro Reclining High Back Bucket Seat – Installation Instructions Parts List and Hardware Identification Seat, Qty - 1 The seat is designed to be installed on the original seat riser. DO NOT remove or loosen any of the original seat riser anchor bolts. Doing so may cause improper anchoring of the seat, which could result in serious injury, to you and others.
PAGE 3
TrailMax™ II Pro Reclining High Back Bucket Seat – Installation Instructions Hole Pattern Remove the Tracks Your new Bestop seat has two (2) mounting holes on each side of the front and three (3) holes on each side of the rear. This allows tracks from various Jeep models to be used with the Bestop seat.
PAGE 4
TrailMax™ II Pro Reclining High Back Bucket Seat – Installation Instructions Install the tracks on the Bestop Seat Press down on the track bar and slide the tracks forward. Install two of the M8-1.25x25 Bolts from the Parts Kit in the rear track mounting holes. Tighten the rear bolts to 21 ft/lbs, using a 13mm Wrench. Insert M8-1.
PAGE 5
TrailMax™ II Pro Reclining High Back Bucket Seat – Installation Instructions For proper use of child seats in this vehicle, refer to the instructions provided with the child seat and to the vehicle owners manual. Never adjust the driver’s seat or seat back when the vehicle is moving. You could loose control of the vehicle and injure someone. This seat system is intended to be used with seat belts at all times.