Installation Manual

ManualsBrandsBestop ManualsAutomotiveBestop 51253-01 Black Driver Side Seat Riser for 1976-1995 CJ5, CJ7 and Wrangler YJ

51254/51253 pg 1

0300 Rev. A

Seat Riser

Installation Instructions

Before you begin installing this seat riser, please read all

installation instructions and warnings thoroughly.

This seat is designed to be used on the model vehicles

described above. Use of this riser on any other vehicle or

failure to install this seat properly may result in an improperly

mounted seat and could result in unexpected movement of

the seat and loss of control of the vehicle, thereby placing the

occupants of the vehicle and others in a potentially danger-

ous situation.

This seat system is intended to be used with seat belts at all

times. Do not rely on the seat to maintain the seating position

of occupants, in the event of an accident.

WEAR SEAT BELTS AT ALL TIMES

Read and follow, precisely, all installation instructions pro-

vided when installing this product. Failure to do so may result

in a poor fit and could place occupants of the vehicle in a

potentially dangerous situation.

WARNING

For: All Jeep

CJ5s, CJ7s and Wranglers 1976-1995 Part Number: 51254 RT

51253 LT

Jeep

is a registered trademark of Chrysler and

Bestop is not affiliated with Chrysler Corporation.

Summary of content (4 pages)

PAGE 1
Seat Riser Installation Instructions For: All Jeep® CJ5s, CJ7s and Wranglers 1976-1995 Jeep® is a registered trademark of Chrysler and Bestop is not affiliated with Chrysler Corporation. Part Number: 51254 RT 51253 LT WARNING Before you begin installing this seat riser, please read all installation instructions and warnings thoroughly. This seat is designed to be used on the model vehicles described above.
PAGE 2
Parts List and Hardware Identification Tools Needed Seat Riser Installation Instructions SeatRiser, Qty - 1 For: All Jeep® CJ5s, CJ7s and Wranglers 1976-1995 Jeep® is a registered trademark of Chrysler and Bestop is not affiliated with Chrysler Corporation. Part Number: 51254 RT 51253 LT WARNING Before you begin installing this seat riser, please read all installation instructions and warnings thoroughly. This seat is designed to be used on the model vehicles described above.
PAGE 3
WARNING Failure to tighten the bolts and nuts to the specified torque can result in the seat loosening, thereby causing serious bodily injury to the vehicle occupants and to others. Step Two Install the new riser, attaching it to the floor with the four bolts removed from the old riser and torque to 34 ft/lbs. Install the Seat in the Vehicle. Place the seat in the vehicle. Align the studs on the tracks with the holes in the seat riser.
PAGE 4
WARNING Never adjust the driver’s seat or seat back when the vehicle is moving. You could loose control of the vehicle and injure someone. This seat system is intended to be used with seat belts at all times. Do not rely on the seat to maintain the seating position of occupants, in the event of an accident.