Installation Manual

51787 pg 1

0301 Rev. B

WARNING

Installation Tips

Before you begin installing this door assembly,

read all instructions thoroughly. If you have ques-

tions concerning this product, please contact

your authorized Bestop Dealer or call our Cus-

tomer Service Department, Monday-Friday 7:30

AM - 5:00 PM (MST) at 1-800-346-3910 or 303-

465-1755 in Colorado.

Upper Door Slider

Installation Instructions

For: Wrangler TJ (1997 and newer) Part Number: 51787

DO NOT INSTALL THIS PRODUCT ON ANY VEHICLE OTHER THAN THOSE LISTED ABOVE.

This product is designed to enhance the appearance of the

vehicle and to shield the occupants from ordinary weather

conditions. Do not rely in any way on the components of this

product to contain occupants within the vehicle, or to protect

against injury or death in the event of an accident. This top

will not protect the occupants from falling objects. Never

operate vehicle in excess of manufacturer’s specifications.

WEAR SEAT BELTS AT ALL TIMES

Read and follow, precisely, all installation instructions pro-

vided when installing this product. Failure to do so may result

in a poor fit and could place occupants of the vehicle in a

potentially dangerous situation. Failure to properly install or

reinstall this product may cause the top or a component part

to come off the vehicle, potentially causing an accident and

possible injury to the occupants of the vehicle. After installing

or reinstalling the product, check to make sure it has been

properly installed.

PAGE 1
Upper Door Slider Installation Instructions For: Wrangler TJ (1997 and newer) Part Number: 51787 DO NOT INSTALL THIS PRODUCT ON ANY VEHICLE OTHER THAN THOSE LISTED ABOVE. WARNING This product is designed to enhance the appearance of the vehicle and to shield the occupants from ordinary weather conditions. Do not rely in any way on the components of this product to contain occupants within the vehicle, or to protect against injury or death in the event of an accident.
PAGE 2
Parts Kit Door, Lt. Door , Rt. Qty - 1 Qty - 1 Step One Slip the pins on the bottom of the door into the sockets in the lower door. Make sure that the pins are well seated in the sockets. Pins Note: Lubricating the upper door pins with a light weight oil will make it easier to install and remove the upper door. Squeeze release and slide to open Step Two To open the window, squeeze the release button and slide the window open. 0301 Rev.
PAGE 3
Care and Maintenance of your Bestop Doors Your doors are made of the finest materials available. To keep them looking new and for the maximum possible wear, they will need periodic cleaning and maintenance. Washing: The fabric should be washed often using soap, warm water and a soft bristle brush. Rinse with clear water to remove all traces of soap. Water: Seeping through at the seams may be stopped by applying 3-M Scotchgard® on the inside of the seams.