Installation Manual

TrekStep™ – Installation Instructions

Rev. C 0810 75301 pg. 2

Parts List and Hardware Identiﬁ cation

Locate Rear Bumper Attachment

Remove Rear Bumper Fasteners

Running Board Assembly,

Part Number 476.24, Qty - 1

Left End Cap,

Part Number

460.83, Qty - 1

Right End Cap,

Part Number

460.82, Qty - 1

T-Nut Insert, Part

Number 460.84,

Qty - 2

M6 Nut Plate,

Part Number

460.86, Qty - 2

M6-1.0 x 10mm Socket

Cap Screw, Part Number

460.85, Qty - 2

Linkage Assembly,

Part Number 476.01,

Qty - 1

Mounting Bracket, Part

Number 476.26, Qty - 1

Spacer, Part Number

476.25, Qty - 1

(Not Used on HD Trucks)

M10-1.5 x 35 Socket

Cap Screw, Part Number

475.98, Qty - 2

(2500 & 3500 HD Only)

Locate the rear bumper attachment point on the driver’s side of the vehicle.

Remove the bumper fasteners. Set them aside to be reused.

M6-1.0 x 20 Socket Cap

Screw, Part Number

470.00, Qty - 3

M10-1.5 x 80 Socket Cap Partial Thread Screw, Part

Number 475.95, Qty - 2 (Not Used on HD Vehicles)