MAGNETIC BIKE USER’S MANUAL CAUTION Read all precautions and instructions in this manual before using this equipment. Keep this manual for future reference. Installation Video https://youtu.
CONTENTS Safety Precautions ………………………………………………………………………………………...3 Exploded View ………………………………………………………………………………………….......4 Part List ........................................................................................................................................5 Assembly Instructions ………………........................................................................................6 Computer Operation Instructions …………………………………………………………………10 Maintenance …………………………………………………................................
Safety Precautions – Please Read the Instruction before Using! 1. According to the installation instruction, use original parts to assemble this product properly. Before assembly, inspect whether packages are in good condition and whether spare parts are complete in accordance with transport precautions and the list of spare parts. 2. Prior to exercise, make sure equipment fasteners are in locking state. 3. Please place the exercise bike on a dry and flat ground. 4.
EXPLODED VIEW 4
Ø8 Curved Washer M8*50 Bolt Ø8 Flat Washer M8 Cap Nut M8*16 Hexagon Screw 13-15 Wrench Spring Washer Self-tapping Screw Multi-function Wrench (Screwdriver) M7*1.0 Screw L shape Wrench PART LIST NO. DESCRIPTION QTY NO. DESCRIPTION QTY 1 Main Frame 1 15 Ø8 Flat Washer 4 2 Front Stabilizer 1 16 M8*50 Bolt 4 3 Rear Stabilizer 1 17 M10 Lock Knob 1 4 Seat Support Tube 1 18 Cover for Handle 1 5 Crank L 1 19 M7*1.
ASSEMBLY INSTRUCTIONS 7 easy steps to assemble then you’re ready to workout – it takes approx 30 mins to assemble. STEP 1 a. Fix the Front Stabilizer (2) to Main frame (1) using 2 X M8*50 Bolts (16), 2 X Ø8 Flat Washers (15) and 2 X M8 Cap Nuts (14) provided by 13-15 Wrench (25). b. Repeat Step a. to install Rear Stabilizer (3) to Main Frame (1). STEP 2 a. Insert the Seat Support Tube (4) to the rear opening tube of the Main Frame (1). b.
STEP 3 Fix the Saddle (8) to the Horizontal Sliding Bar (7) with the provided 13-15 Wrench (25) until tight. STEP 4 a. Before fixing the Handlebar Support Tube (26), please connect the tension and sensor cables as shown in the following illustrations: (1) Adjust the tension control to 8 levels, making sure the supper tension cable (A) to bet the longest. (2) Insert the upper tension cable (A) to the hole (C) in the middle of the lower tension hook (B).
b. After finish connecting all cables, insert the Handlebar Support Tube (26) to the front opening tube of the Main Frame (1), to tighten it with 4 X Ø8 Curved Washers (12) and 4 X M8*16 Hexagon Screws (13) by L shape wrench (23). STEP 5 a. Fix Handlebar (9) on the Handlebar Support Tube (26) and tighten with 2 X M7*1.0 Screws (19), 2 X Spring Washers (11-2) and 2 X Ø8 Flat Washers (11-1) by L shape Wrench (23). b. Then button the Cover for Handle (18) on the Handlebar (9).
STEP 6 a. Unscrew the two Screws (28) pre-fitted on the Computer (10). b. Fix the Computer (10) on the bracket with 2 x Screws (28) by the provided Multi-function Screwdriver (24). c. Unscrew the two Self-tapping Screws (27) pre-fitted on the handlebar support tube, then fix the Water Bottle (20) on it with the two Self-tapping Screws (27) by the provided Screwdriver (24). STEP 7 a.
COMPUTER OPERATION INSTRUCTIONS SCAN Scans all functions – TIME, SPEED, DISTANCE, TOTAL DIST, CALORIES TIME Displays work out time lapse while exercising SPEED Displays the current speed DISTANCE Displays the distance while exercising TOTAL DIST Displays the total distance at the end of your workout CALORIES Displays the calories you have burned PULSE Displays the heart rate 1. You will need 2AA batteries (provided) to operate the Computer. 2.
MAINTENANCE Regular maintenance will prolong the life of your spin bike and prevent injury. We strongly recommend that you do the following on a regular basis: 1. Clean the bike after use with a soft cloth – ensure it is dry. Note, a build up of moisture over time will cause corrosion. 2. Clean the Computer display with a soft cloth and anti-static computer spray to remove dust or finger prints.
EXERCISE INSTRUCTIONS Using your EXERCISE CYCLE will provide you several benefits, it will improve your physical fitness, tone your muscle, and in conjunction with calorie controlled diet, it will help you lose weight. 1. The Warm Up Phase This stage helps the blood flow around the body and the muscles work properly. It will also reduce the risk of cramp and muscle injury. It is advisable to do a few stretching exercises as shown below.
TROUBLESHOOTING REF PROBLEM SOLUTION 1 THE PEDALS ARE SPINNING 1. ADD MORE RESISTANCE BY TURNING THE TENSION CONTROL TO THE OUT OF CONTROL RIGHT. 2. START PEDALLING SLOWLY. 3. KEEP TURNING THE TENSION CONTROL TO THE RIGHT UNTIL YOU CAN FEEL RESISTANCE WHEN YOU PEDAL. 2 THE BIKE IS UNSTABLE 1. ADJUST THE FRONT AND BACK STABILIZERS UNTIL THEY ARE FLAT ON THE SURFACE. 2. SHAKE THE BIKE TO ENSURE IT’S STABLE.
WARRANTY 1. We have one year quality warranty to the products. Within the warranty period, we provide the FREE replacement parts, and provide technical support for life. 2. If caused by incorrect assembly, incorrect use or change of parts failures, our company takes no responsibility. 3. The exercise bike is only for home use, if the problems occurred by commercial use, our company takes no responsibility. 4.
