Instruction Manual

-17-
Using instructions
Press the button, all functions off.
STOP
Press the button, rear spray function turns on, auto off after 2 mins or off by pressing
the stop button.
Function will stop if user leaves.
REAR
MASSAGE
During rear/bidet wash mode, press the "Massage" button, function will start after a beep.
1. Interval massage mode: The nozzle sprays with varying pressure.
2. Powerful massage mode: The nozzle sprays pressurized water.
Remark:
The Massage cycle order is interval massage ＞ powerful massage ＞ regular cleaning.
MASSAGE
Press the button, bidet/front spray function turns on, auto off after 2 mins or off by
pressing the stop button.
Function will stop if user leaves.
BIDET
FLOW
Under rear/bidet wash mode, the water flow is settled on normal level( initial level is in
the medium ).
Press "FLOW" button to start the flow adjustment，and press plus button to increase flow,
press minus button to decrease flow. Total 5 levels, and corresponding indicator will on
under different level.
FLOW ADJUSTMENT
SWING
During rear/bidet wash mode, press the "Swing" button, function will start after a beep.
During swing function, the nozzle will oscillate back and forth. Press the "Swing" button
again to stop swing function. Pressing the "Stop" button will stop all cleaning functions.
SWING
TEMP
Under rear/bidet wash mode, initial level is in the medium.
Press "TEMP" button to start the water temp, and press plus button to increase water
temp, press minus button to decrease water temp, total 3 levels, and corresponding
indicator will on under different level.
WATER TEMP SETTING
POSITION
Under rear/bidet wash mode, initial level is in the medium.
Press "POSITION" button to start the position adjustmen, and press plus button to
forward the nozzle position, press minus button to backwaed the nozzle position.
Total 3 levels, and corresponding indicator will on under different level.
NOZZLE POSITION ADJUSTMENT
SEAT TEMP ADJUSTMENT
Seat heated after sitting, heat preservation after reaching the set temp. The initial level
is in the medium. Press "SEAT" button to start the seat temp, and press plus button to
increase the seat temperature, press minus button to decrease the seat temperature.
Total 3 levels(including neutral), and corresponding indicator will on under different level.
SEAT