Instruction Manual

Using instructions
-18-
Press the button, dry function on after sounded.(Default level is 3.Press plus button will
increase warm dry temp.Press minus button will decrease warm dry temp，total 5 levels.
and corresponding indicator will on under different level）Auto off after 2 mins or off by
pressing the stop button.
Function will stop if user leaves.
DRY
DRY
ECO
Press the button to enter energy saving mode.
Under energy saving mode, seat temperature is low(level 1) to achieve energy saving;
only the power indicator light on the display is on, others are off.
Remark:
※Energy saving mode will be suspended and goes to function mode if someone uses
the seat in the middle of energy saving.
※Seat temperature returns to the level which is settled, the display lights up normally.
※The energy saving mode is restored after the human body leaves the seat.
USER1
USER2
PERSONAL SETTING USER1/PERSONAL SETTING USER 2
Under rear/bidet wash mode, you can set your preferred water temp, wand position,
flow and warm dry temp. While cleaning is in progress, set yourpreferred water temp,
flow, wand position and warm dry temp, and then press and hold (User1) or (User2)
for 2 seconds or longer. After (User1) or (User2) is pressed, please push the button used
for rear/bidet wash.
LID OPEN/CLOSE
When lid open/close, press the button, lid automatically turn off/turn on after sounded.
FLUSH
Press "flush" button to activate flushing.
Flush
SEAT OPEN/CLOSE
When seat open/close, press the button, seat automatically turn off/turn on after sounded.
※When lid close, press the button, the inductor sense that the lid is closing.
※The program automatically open the lid，and then opening the seat automatically.
COMBINATION FUNCTION KEYS
Stop + Rear wash: Long press for 5 seconds to activate or deactivate the powerful deodorizing
function.
Stop + Bidet wash: Long press for 5 seconds to activate or deactivate the night light function.
Stop + Massage: Long press for 5 seconds to activate or deactivate the foot sensing function .
Flush + Rear wash: Long press for 5 seconds to activate or deactivate the pre-wetting.
Rear wash + Bidet wash: Long press for 5 seconds to activate or deactivate the automatic nozzle
cleaning .