Instruction Manual

-20-
1. Disconnect the power, turn off tee valve.
2. In case of using a mixture of washing agent and water as well as any available solution for
seat cleaning, use soft and wet sponge or cloth to clean the seat. Use a soft towel to make the
seat dry, or let it dry naturally.
※The product is an electric appliance. Be careful not to allow water to get inside or leave
detergent in the gap between the top unit and the bowl unit. Doing so could damage or
malfunction.
※Avoid using materials that will damage the surface-clean the surface with a soft and wet
sponge or cotton cloth, instead of materials that can damage the surface.
※Corrosive chemicals or cosmetics (such as cleaners containing abrasive compounds and
aftershave) should not come in contact with the seat as this will damage the surface.
3. Connect the power, turn off tee valve.
1. Disconnect the power.
2. The bowl unit can be cleaned with a toilet brush, toilet detergent or a similar tool.
※Corrosive chemicals (such as cleaners containing abrasive compounds and strongly acidic
ceaners or strong alkaline ceaners) should not wash the bowl as this will damage the surface
of bowl.
※Wire brush and abrasive nylon scrubbing brush should not wash the bowl as this will
damage the surface of bowl.
※Do not use any water repellant, stain-proofing cleaner or surface coating agent.
3. Connect the power.
※Notice: If the bowl unit is clogged, use commercially available tools that are made for un
clogging toilet.
Maintenance and cleaning of the bowl.
Cleaning
Maintenance and cleaning of lid and seat.
Cleaning the water filter
② Remove the water-inflow filter from
the inlet hose.
③ Take out the filter by using a flat-blade
screwdriver to unscrew the filter .
④ Remove the filter screen and rinse
it with clean water.
⑤ Install the filter screen as it is, be
sure to tighten it, otherwise it will
cause water leakage.
① Unplug the product.
Shutoff water supply.
G1/2