Instruction Manual

-22-
The toilet seat does not
get warm.
The seat sensor may have difficulty detecting
some sitting postures.
The toilet seat temperature set a low level.
Sit back on the toilet seat.
Use the remote control to adjust seat
temperature.
Trouble shooting
Phenomenon
The product out of work
Insert the plug or detect the power socket.Whether the power supply is plugged in.
Power failure.
Wait until the power is restored.
Has a water failure occurred? Press the
“stop”button and wait until the water
failure is over.
Is the water supply valve close ?
turn on the tee valve.
Is the water filter drain valve clogged with
foreign matter? Clean or replace the filter.
Insert the plug the power socket, press
reset button on the plug.
The leakage protector is disconnected.
The wand extends but water does not come
out.
The cleaning water pressure is weak.
Low water temperature setting
The nozzle stops cleaning
suddenly.
Low water pressure when
rear/bidet wash.
Deodorization effect is
not obvious.
Deodorant function
continues to work after
user leaves.
If the user moves too fast or leaves the seat,
the seat sensor cannot detect in short time.
Filtration screen of inlet angle valve may be
blocked
The water-inflow hose may leakage
The seat sensor does not sense someone
sitting (no deodorizing sound)
Activated carbon fiter block or spacer may
be blocked.
Replace the inlet hose.
Water comes out
unexpectedly from the
inlet hose.
Water comes out
unexpectedly from the
wand.
the inlet hose may damage
Abnormal operation
Disconnect the power plug and wait
about 1 minutes before inserting it
again.
The deodorant function will be continue to
work for 20 seconds in order to remove the
residual odor after the use leaves.
Remove the deodorizing window to clean
or replace the activated carbon filter.
Check the hose and tighten it.
It’s common phenomenon.
Sit back on the seat sensor detection
position.
Sit back on the seat sensor detection
position,then start the relevant button.
Clean or replace the filter.
Use the water temperature keys on the
remote control to adjust the cleaning
water temperature.
The seat sensor may have difficulty detecting
some sitting posture.
Sit back on the toilet seat.
Reasons Measures
Rear cleaning
Bidet cleaning
Dry
The toilet does not flush
even when the button is
pressed.