Instruction Manual

WARNING
-3-
Disconnect the power supply before removing this product from the toilet to
prevent electrical shock or fire.
All electrical cords and plugs must be waterproof.
The electrical plug must be located more than 0.5m above the floor and away
from the bathtub and shower. Otherwise, it could cause electrical shock or a
fire.
To prevent electrical shock or fire, disconnect the power supply before cleaning
the product and do not apply water directly to it.
Do no expose the product to direct sunlight.
The grounding wire must conform to local codes and must use a three-pronged
grounding plug for use.
Persons with special health conditions should only use this product with the
permission of their doctor. In some instances, supervision or assistance may
be necessary when using the product.
Do not allow children to play with this product. Children must have adult
supervision when using the product.
Do not use industrial water, wastewater, seawater, reclaimed water and other
sewage water. This could cause skin inflammation or other conditions.
When replacing an existing bidet toilet seat, remove the old hose assemblies
and replace them with the included hose assemblies. Do not reuse the old
hose assemblies to avoid safety related problems.
Caution
Make sure the product is installed in a well-ventilated area. Excess humidity
and moisture could cause electrical shock or fire.
Persons (including children) with physical, perceptual, intellectual disabilities
or other conditions, need to use the product under the guidance or supervision
of someone else, or they may experience electric shock, injury or fire.