Specifications

Pack 353 Pinewood Notebook
Page 12 2012 pinewood notebook
Run test runs to make sure everything is connected properly.
NOTE: Get chairs out from under stage before setting up track!
When assembling the track start with the joint closest to the start gate and work toward the
finish line. Finger start all 4 screws before tightening. The screws should be able to be turned
with fingers or light pressure with screw driver. Be careful not to cross thread the screws. Once
all four screws are started tighten the two screws closest to the seam first. Firmly tighten but be
careful not to over tighten. This will make the seam the tightest.