Specifications

Pack 353 Pinewood Notebook
Page 13 2012 pinewood notebook
Once the screws are tight run your finger over the seam. The track should be flush. If it is not
flush check to make sure the screws are all tight. If the joint is still not flush, remove the screws
and look for debris on the underside of the joint. If the seam is still not flush after reassembly
you may need to lightly sand the seam to make it flush ( I have never had to do this so check
carefully for obstructions first).
The next step is easiest with two people. Have one person lift the starting end of the track while
the other puts the legs down. WATCH YOU FINGERS! The support legs are both hinged so
just swing them into place.