Use and Care Manual

12
B
C
A
C
B
A
C
B
A
D
C
B
D
A
Backwash: This function is used to clean
the sand bed; water is pumped down
through the Collector Hub, upwards through
the sand bed, and deposited out of Port D.
Rinse: This function for initial startup,
cleaning, and sand bed leveling after
Backwash; water is pumped downwards
through the sand bed, up through the
Collector Hub and deposited out of the
valve Port D.
Closed: This function stops water flowing
between the sand filter and the pool.
Filter: This function is used to filter pool
water and should be positioned here 99% of
the time. Water is pumped through the sand
filter, where it is cleaned and returned to the
pool.
C
B
D
A
C
B
A
Circulate: This function circulates pool
water bypassing the sand filter; use this
function if the filter is broken to collect debris
in the Debris Screens.
Drain: This function drains water from the
pool; another filter bypass setting, water is
pumped and deposited out of Port D,
instead of returning it to the pool.