Use and Care Manual

ManualsBrandsBestway ManualsOutdoorsFlowclear 2200 Gal. Sand Filter Pump for Above Ground Pools

POOL SUCTION FITTING

INSTRUCTIONS

When installing and using this equipment, basic safety precautions shall always be

followed, including the following:

IMPORTANT SAFETY INSTRUCTIONS

READ, FOLLOW, AND UNDERSTAND

ALL INSTRUCTIONS AND WARNINGS.

- Any modification that increases the flow rate of the circulation system shall require

re-evaluation of the cover/grate and sump to ensure that the flow rating of the

Suction Outlet Fitting Assembly (SOFA) is not exceeded.

- Missing, broken, or cracked cover/grates, sumps, mud-frames, or any other SOFA

component shall be replaced before bathers are allowed to use the pool.

- Loose cover/grates shall be reattached before bathers are allowed to use the pool.

1. Replace suction fittings every 2 years.

2. The use of adhesives or other attachment methods that prevent access to suction

piping or SOFA components requiring periodic servicing is prohibited.

3. Refer to the following diagram for each SOFA component part instructions:

4. - Any field modification made to a SOFA not authorized by the manufacturer’s

installation instructions shall void the SOFA certification.

- No modification shall be made to a SOFA structure or flow path unless the new

configuration has been certified as new SOFA.

- Cover/grates and all other SOFA components

shall be replaced at or before the end of their

service life and that service life begins the

month and year in which a SOFA component is

installed with or without water.

5. Winterizing instructions. Dry the suction fittings

completely, and store the product in a dry room

at a storage temperature of

15 ℃ ~ 40 ℃.

6. Use the screwdriver (not included) to disassemble the suction fitting to clean or

service.

- Cover/grate, including fasteners, shall be observed for damage or tampering

each operational day.

- Missing, broken, or cracked cover/grates shall be replaced before bathers are

allowed to use the pool.

- Loose cover/grates and associated components shall be reattached before

bathers are allowed to use the pool.

- SOFA components and fastener receptacles shall be clean and free of debris or

obstructions during installation of cover/grate and fasteners.

- Remember to hand-check cover/grate for snugness to the sump/ frame after

installation.

7. Before using the product, please check the integrity of the head of the suction

fitting. If the product is broken, cracked, or the color has significantly faded,

please do not use it.

8. - All SOFAs shall be installed in accordance with the manufacturer’s installation

instructions.

- No modification shall be made to a SOFA structure or flow path unless the new

configuration has been certified to the original SOFA.

- These SOFA-configuration specific flow ratings NOT be exceeded at any time

the pool is open to bathers.

- Cover/grates, when installed, shall not protrude more than 2 in. (51 mm) from

the finished surface of the pool in which the SOFA is installed.

Please research and download General Certificate of Conformity through

www.bestwaycorp.com

SAVE THESE INSTRUCTIONS

GFCI WARNING

WARNING: Risk of electric shock. The GFCI must be tested before

each use.

WARNING: Do not use the pump if this test fails. For assistance,

please visit the support section on our website, www.bestwaycorp.com.

Before assembling the sand filter, take a few minutes to

become familiar with all the sand filter parts.

PARTS REFERENCE OVERVIEW

P03850

P61138ASS16

P03832

P61209ASS16

P03833

P03834

P61211ASS16

P6581ASS16

P6580ASS16

P03835

P6614ASS16

P6029ASS16

P03830

P61214ASS16

P61210ASS16

P03829

P6916ASS16

P6124ASS16

P6561ASS16

P6562ASS16

P6563ASS16

P04451

P03840

P6517ASS16

P06188

P61318ASS16

P6019ASS16

P61408ASS16

P6005ASS16

P6783ASS16

REF.NO

SPARE PART NO. B

(P06188) (P61318ASS16)