Quick Start Guide

Congratulations! You have just

purchased the ﬁnest pedal-assisted

electric bicycle in the market today.

Your BESV e-bike can be pedaled like a normal bike, or it can

assist you while you pedal. But before you enjoy the amazing

experience of riding your new BESV e-bike, take a few minutes

to read over this convenient Quick-Start Guide. And, of course,

be sure to read your Owner’s Manual thoroughly before you

start to ride.

LX1

Quick-Start Guide

IMPORTANT

• This Quick-Start Guide contains important safety and performance

information about your BESV e-bike.

• Read it before you ride your new e-bike, and refer to it, whenever needed.

• Additional important information is also found in the Owner’s Manual.

• Read the Owner’s Manual thoroughly before riding your e-bike.

• If you have any questions or if there is anything you do not understand,

consult with your bicycle dealer or BESV.

NOTE: This Quick-Start Guide is not intended as a comprehensive document.

For further information, refer to the Owner’s Manual

or visit www.besv.com

PAGE 1
Congratulations! You have just purchased the finest pedal-assisted electric bicycle in the market today. For further information, refer to the Owner’s Manual or visit www.besv.com IMPORTANT • This Quick-Start Guide contains important safety and performance information about your BESV e-bike. • Read it before you ride your new e-bike, and refer to it, whenever needed. Your BESV e-bike can be pedaled like a normal bike, or it can • Additional important information is also found in the Owner’s Manual.
PAGE 2
Understanding Your BESV E-Bike Refer to the image below for a quick overview of some of your e-bike’s important parts and features. Turning on the E-Bike’s Power Make sure the battery is installed properly before turning on the power in your e-bike. Note: In order to save battery power, the BESV Interface display backlight will automatically turn off after the e-bike has been stationary from more than 10 seconds.