Specifications

1
8
REMOVING THE ENGINE FROM THE VEHICLE
The three screws of the flywheel casing.
The four screws of the clutch actuator.
Extracting the control box from its support.
FLYWHEEL CASING, CLUTCH
ACTUATOR AND PINION
Loosen the three screws that fasten the
flywheel casing to the engine. This will let
you access the clutch actuator, which is re-
moved from the engine by loosening the
four screws indicated. Remove the pinion
by removing the specific Seeger ring.
ELECTRONIC CONTROL BOX
Disconnect the electronic control box from
the electrical system by pressing the flap A
on the connector, then pull upwards for the
control box to emerge from its support.
1.5
1.6
A