Specifications

1
10
REMOVING THE ENGINE FROM THE VEHICLE
ENGINE BOLTS:
A) swing arm bolt;
B) upper bolt;
C) lower bolt;
D) bracket bolts.
Swing arm bolt not being removed completely.
ENGINE BOLTS
The engine is fastened to the frame by four
bolts: one at the front, one at the bottom,
one at the top and one at the back. The
description of the first of these four bolts
being removed is found in paragraph 1.4,
removal of the radiator. It is recommended
to remove the engine from the frame by
first removing bolt A at the back (swing arm
bolt), then the upper bolt B and lastly the
lower bolt C. The control box support will
also be removed when the nut from bolt B
is removed.
It is recommended to also loosen both bolts
D, so as to facilitate removing and reassem-
bling the engine onto the frame.
Please note that bolt B does not have to
be removed completely for the engine to be
removed. In fact, it must be loosened enou-
gh for the engine to be removed from the
frame, thereby you will avoid removing the
swing arm from the frame.
1.9
C
A
A
D
B