Specifications

2
12
DISASSEMBLING THE ENGINE
HEAD ASSEMBLY.
1) External cap.
2) Combustion chamber.
3) Seal head.
4) O-ring.
5) Screws.
6) Copper washers 7x12x0.5
HEAD
Once the water circuit is emptied, it is re-
commended to blow compressed air into
the sleeve connected to the head in order
to be sure there is no fluid in the thermal
unit.
Once the water sleeve is disconnected, lo-
osen the spark plug, then the seven screws
that fasten the external cap to the cylinder.
Lift the head and once it is placed on a le-
vel surface, remove the spark plug. Lightly
press the spark plug housing to decouple
the combustion chamber from the external
cap. If necessary, proceed with the desca-
ling procedures of the combustion chamber
and the internal part of the cap.
2.1.1
6
4
3
5
2
1