Specifications

2
15
DISASSEMBLING THE ENGINE
FLYWHEEL
Keep the flywheel in place by means of a
special universal device A. Unscrew the
nut that blocks the flywheel to the motor
shaft. Screw the special extractor B (code
1480210.000) into the internal thread of
the flywheel and extract it by tightening the
central screw that presses onto the motor
shaft. During this process, the flywheel is
kept in place by using a simple flat span-
ner.
2.3.1
Blocking the flywheel with the universal tool.
Decoupling the flywheel from the motor shaft
by means of extractor B (code 1480210.000)
A
B
Note: the GB version is provided with an ex-
tra mass which must be removed before di-
sassembling the flywheel. In order to do this,
heat the two screws and then remove them.