Specifications

DISASSEMBLING THE ENGINE

PRIMARY GEAR

The clutch bell must be in its housing for

the primary gear to be disassembled. You

must remove the internal cover of the clutch

to access the primary gear. This procedure is

described in paragraph 2.4.

Use the special primary tool A (code

007.14.000.0.0) to loosen the screw that

fastens the primary gear 1 to the motor

shaft.

In the case of a 125 cc engine, the prima-

ry gear is removed from the crankshaft by

means of an extractor with three arms B.

In the cases of 200 cc, 250 cc and 290 cc a

universal extractor C is sufficient.

2.5

Disassembling the screw that blocks the primary gear

to the motor shaft.

Disassembling the primary gear in a 125 cc engine.

Disassembling the primary gear in 200 cc, 250 cc and

290 cc engines.