Specifications

3
26
ASSEMBLING AND TESTING THE ENGINE
TESTING THE FORKS, FORK PINS
AND DESMODROMIC DEVICE
Verify that the guide pins 1, which engage
in the desmodromic control, do not present
any signs of seizing or abnormal wear-and-
tear and that distance A between the exter-
nal surfaces of the fork is not less than the
below-mentioned minimum.
Minimum acceptable distance: 4.4 mm.
Verify that the fork pins onto which the forks
slide, are not particularly worn or corroded.
Verify that the desmodromic control device
does not have any corroded and/or worn
areas, especially the grooves in which the
guide pins of the forks are engaged.
3.3.2
Testing the wear-and-tear of the forks.
1
A