Specifications

3
27
ASSEMBLING AND TESTING THE ENGINE
Inserting the gear in the left casing .
ASSEMBLING THE INTERNAL
TRANSMISSION CONTROL
Assemble the gearbox according to the ex-
ploded view hereunder, externally from the
engine after having verified the wear-and-tear
state of the washers and six shim washers.
Insert both primary and secondary units, si-
multaneously, in the respective housing in
the left casing.
Remember to heavily oil the gears and the
shafts that support them.
It is recommended to verify that all compo-
nents slide perfectly.
3.3.3
43
4) Shim washer 20x30x0.5;
5) Primary shaft;
6) 7) Roller assembly 16x21x10;
8) 5vp gear;
9) Slotted washer;
10) Seeger 19sw;
11) 3 / 4vp gear;
12) Seeger 19sw;
13) Slotted washer;
14) 6vp gear;
15) 2vp gear;
16) Washer thickness 15x25;
20) Seeger 20e;
21) Oil seal ring;
23) Secondary shaft;
24) 25) 26) Roller cage 18x22x10;
27) 2vs gear;
28) Slotted washer;
29) Seeger 20sw;
30) 6vs gear;
31) Seeger 20sw;
32) Slotted washer;
33) 3vs gear;
34) 4vs gear;
35) Slotted washer;
36) Seeger 20sw;
37) 5vs gear;
38) Shim washer 18x27x0.8;
39) 1vs gear;
40) Assembly 18x22x10;
41) Washer thickness 15x25.
GEARBOX EXPLODED VIEW: