Specifications

3
37
ASSEMBLING AND TESTING THE ENGINE
3.7.3
3.7.4
TESTING THE SPRINGS
To ensure that the pressure between the
clutch discs is correct, you must verify the
wear-and-tear state of the springs. The mi-
nimum acceptable length is:
minimum length of the clutch springs: 33.3
mm (new springs 33.8 mm).
TESTING THE CLUTCH DRUM
The clutch drum is engaged with the dri-
ven clutch discs by means of teeth A: verify
that the teeth do not present any seizing or
abnormal wear-and-tear. If so, replace the
drum.
Testing the teeth of the clutch drum.
Measuring the length of the clutch springs.