Specifications

FOREWORD
Carbon Monoxide
• The exhaust gases contain carbon monoxide,
which is a poisonous gas. Carbon monoxide
can cause loss of consciousness and lead to
death. When starting-up the engine, ensure the
area is well-ventilated. Never start-up the engi-
ne indoors.
• The engine can only be started-up indoors
if there are appropriate means to evacuate
exhaust gases.
Petrol
• Petrol is extremely flammable and in certain
conditions, explosive.
• Keep sources of heat, sparks and flames away
from the work area.
• Always work in a well-ventilated area.
• Never use petrol as a cleaning solvent. Avoid
handling petrol, unless absolutely necessary.
• Do not use petrol to clean the components –
use compressed air.
• Keep out of reach of children.
Engine oil
• Engine oil can cause skin diseases if repeated
and/or prolonged contact is made with skin.
• If engine oil comes in contact with your skin,
wash with soap and water as soon as possible.
• If contact is made with your eyes, rinse thorou-
ghly with water and consult a doctor.
• If swallowed, do not induce vomiting so as to
prevent it from being absorbed into the lungs.
Consult a doctor immediately. If you think the
product has been absorbed into the lungs, the
person in question is to be taken immediately
to hospital.
• Spent oil contains hazardous substances that
are harmful to the environment. When this is
replaced, you must have the right equipment
for its disposal in compliance with applicable
regulations.
• Do not dispose of spent oil in the environ-
ment.
• Keep out of reach of children.
FOREWORD
This manual has been drafted for the motorcycle user and Technical Support operator, whereby it provi-
des understandable information pertaining to the necessary operations of engine inspection, maintenan-
ce and repair.
This manual must be thoroughly read before operating the engine. Engine life is prolonged by having a
good knowledge of all the components and all the procedures to be followed when carrying out inspec-
tion and maintenance operations.
Schematic illustrations that highlight the subject matter have been included within the paragraphs for the
reader to immediately understand that being read.
Informative note
Betamotor S.p.A. is committed to continuously improve its products. For this reason, there may be slight
differences between that provided in this manual and the vehicle onto which you are to perform mainte-
nance and/or repair operations. The Betamotor S.p.A. models are exported to many countries where dif-
ferent standards apply in relation to the Highway Code and approval procedures. Betamotor S.p.A. relies
on your comprehension of the information, therefore it considers it necessary to reserve the right to effect
changes to its products and technical documentation at any given time and without prior notice.
Respecting and protecting the environment
All that we do has repercussions on the entire planet and its resources. In order to protect the Com-
munity, Betamotor S.p.A. raises awareness amongst its Clients and Technical Support operators in
order for them to use the vehicle and dispose of its parts in compliance with applicable regulations
in terms of environmental pollution, disposal and recycling waste.
2
www.betamotor.com
SAFETY