Specifications

3
40
ASSEMBLING AND TESTING THE ENGINE
3.9
INTERNAL COVER OF THE CLUTCH
Couple a new seal with the left casing after
inserting centering pins and the internal co-
ver of the clutch.
The layout of the bolts is shown in the pictu-
re and these must be tightened to a torque
of 10Nm by following a cross-wise pattern
as shown in the picture below.
Tightening order of the casing cover bolts.
M6X20
M6X35
M6X20
M6X20
M6X35
M6X30
M6X30
Layout of the screws on the internal cover of the
clutch.
1
5
4
7
6
2
3