Specifications

4
58
MOUNTING THE ENGINE ON THE VEHICLE AND REPOSITIONING THE COMPONENTS
4.8
EXHAUST MANIFOLD
Reposition the exhaust manifold 1 onto
the vehicle for the two flange openings to
be close to the respective openings on the
cylinder. Couple the manifold with the si-
lencer 3, interpose the seal 21 between the
cylinder and the exhaust manifold and in-
sert bolt 18 (M8x1.25x20) into the opening
on the right side of the cylinder. Push the
manifold into the silencer whilst paying ut-
most attention to O-rings 2 so as to ensure
they do not get entangled and break.
Insert the second bolt 18 (M8x1.25x20) into
the left opening on the manifold flange and
tighten the two bolts 18 with a torque of
23Nm.
To facilitate the tightening process, it is re-
commended to turn the handlebar to either
side so as to leave more handling space
when using a hexagonal spanner with a
spherical head.
EXHAUST PIPE EXPLODED VIEW:
1) Exhaust manifold;
2) O-ring;
3) Silencer;
18) Bolt 8x20;
19) Grover washer;
21) Seal