User`s manual

MACHINE PREPARATION

12. INSTRUMENT PANEL COMPONENTS

The instrument panel components are identified as follows:

1- Paddles to activate brushes / traction (located beneath the grip)

2- ON/OFF key switch

3- battery level / hour-counter display

13. REAR COMPONENTS

The rear components are identified as follows:

1- Foot pedal to raise the brushes

2- Water / solution level hose

3- Drainage hose with recovery tank cap

4- Latch to close the tanks

5- Compartment storage

6- Lever to raise the squeegee

7- Solution filter

14. SIDE COMPONENTS

The side components are identified as follows:

1- Valve for manual regulation of clean water outlet

2- Handle to raise the recovery tank

3- Handle to raise the vacuum unit

4- Upper storage compartment

5- Brake lever

15. ASSEMBLING THE SQUEEGEE

For packaging reasons, the squeegee is supplied dismounted from the machine, and

must be assembled as follows:

1- Insert the two small pins of the squeegee in the appropriate holes on the squeegee

support;

2- Insert the two cotter pins chained to the squeegee;

3- Plug the squeegee hose in the appropriate sleeve of the squeegee nozzle.

2 3