User`s manual

OPERATION

1. MACHINE OPERATION

1. Connect the battery plug (1) to the machine plug

2. Turn the key (1) of the main switch to the "ON" position (clockwise). The battery

charge level indicator lights will immediately come on.

3. Turn on the water valve (2) (the water falls automatically while the brushes are turning).

4. Release the lever (3) and lower the scrubbing head. If the floor is particularly dirty, you

can apply an overpressure to the scrubbing head by raising the pedal (3) until the lock

down is triggered.

5. Lower the squeegee, turning the lever (4) counter clockwise. The vacuum motor will

switch on.

6. Check that the brake (5) is off.

7. Pressing the paddles (1), activates the brushes and the machine begins to move

(model with traction). During the first feet, check the amount of solution is correct,

and that the squeegee dries the floor perfectly.

8. The machine will now start to scrub and dry until the solution tank is empty or

recovery tank is full.