User`s manual

SHUTTING DOWN THE MACHINE

1. AT THE END

Proceed as follows when shutting down the machine and before you perform any type

of maintenance:

1. Turn off the valve using its handle (1)

2. Raise the brush deck using the pedal (2)

3. Raise the squeegee using the lever (3)

4. Turn off the key switch (4)

5. Move the machine where the tanks can be drained

6. Remove the drainage hose from its compartment, unscrew the drainage cap and

empty the recovery tank.

7. The squeegee must be raised when the machine is not operating, in order to avoid

deforming the squeegee blade blades.

8. Disassemble the pads and clean them with water (to disassemble the pads, see

“DISASSEMBLING THE PAD” below).

WARNING: Always wear gloves when doing this operation to

protect you from contact with hazardous chemicals.