User`s manual

DAILY MAINTENANCE
1. CLEANING THE RECOVERY TANK
1. Raise the vacuum cover (1) and prop it open using the lifting rod on the right-hand
side of the lid.
2. Remove the drainage hose (2) from its fitting and empty the tank.
3. Rinse the inside of the tank well with water.
4. Reposition the cover on the machine and replace the drainage hose cap and
drainage hose.
WARNING: Always wear gloves when doing this operation to
protect yourself from contact with hazardous chemicals
2. CLEANING THE VACUUM FILTER
1. Raise the cover.
2. Remove the vacuum filter cover by rotating it clockwise.
3. Pull the filter straight away from the lid to remove it.
4. Use water to clean the walls and base of the filter.
5. Carry out the cleaning operations carefully.
6. Reassemble all the elements.
WARNING: Always wear gloves when doing this operation to
protect yourself from contact with hazardous chemicals
3. CLEANING THE VACUUM HOSE FILTER
1. Raise the vacuum cover.
2. Rotate the inner filter (1) and remove it.
3. Use water to clean the walls and base of the filter.
4. Carry out the cleaning operations carefully.
5. Reassemble all the elements.
WARNING: Always wear gloves when doing this operation to
protect yourself from contact with hazardous chemicals
2
1
1