User`s manual

DAILY MAINTENANCE

4. CLEANING THE SQUEEGEE

Ensure the squeegee is always clean, for better drying results.

To clean it you must:

1. Remove the hose from the squeegee

2. Loosen the knobs (1) at the hose nozzle

3. Remove and clean the nozzle

4. Carefully clean inside the squeegee

5. Carefully clean the squeegee blades

6. Reassemble all the squeegee assembly

5. DISASSEMBLING THE PAD

To disassemble the pad, proceed as follows:

1. Turn on the machine with the key switch

2. Press the pedal that raises and lowers the base, and keep it pressed

3. Press the paddles (2) then release them immediately

4. Upon release, the brush will be automatically release from the base

6. REPLACING THE SQUEEGEE BLADES

Check the state of wear and tear of the squeegee blades and, if necessary, replace them.

To replace them you must:

1. Remove the squeegee hose from the nozzle

2. Remove the cotter pins that fix the pins of the squeegee

3. Disassemble the squeegee from its support

4. Loosen the wing nuts by two turns (1)

5. Remove the squeegee band clamp and squeegee blade

6. Replace the squeegee blades

To reassemble the squeegee, repeat the above-mentioned operations in the reverse order.

WARNING: Always wear gloves when doing this operation to

protect yourself from contact with hazardous chemicals