Product Manual

9Rev. - 922123-01
SPECIFICATIONS
M-150S M-180S M-240S
Application
Designed to safely transfer low viscosity petroleum fuels such as gasoline (up to 15% alcohol blends
such as E15), diesel fuel (up to 20% biodiesel blends such as B20) and kerosene. Pump is designed
for permanent mounting on vented storage tanks.
Pump Housing Lightweight, corrosion-resistant, cast aluminum body, convenient union ring for easy installation.
Performance
Pump Rate Up to 15 GPM (57 LPM) Up to 18 GPM (68 LPM) Up to 15 GPM (57 LPM)
Duty Cycle 30 min. ON, 30 min. OFF
Suction Lift: Manual Nozzle Up to 5.5 ft. (1.7 m)
Automatic Nozzle Up to 4.8 ft. (1.5 m)
Operating Temperature -20° F to 125° F (-29° C to 52° C)
Operating Pressure 15 PSI
Electrical Specications
Input 12-volt DC 24-volt DC
Current Draw 18 amps 20 amps 9 amps
Motor 1900 RPM, 1/5 hp (150 watts) 2000 RPM, 1/4 hp (187 watts) 1900 RPM, 1/5 hp (150 watts)
Motor Approval UL Listed, CSA Certied
Motor Protection 20 amp circuit breaker 25 amp circuit breaker 15 amp fuse
Cord 18 ft. of 12 ga. (5.5 m)
Fuse 25 amp 30 amp 15 amp
Mechanical Connection
Bung 2 inch NPT
Inlet 1 inch NPT
Outlet 3/4 inch NPT 1 inch NPT 3/4 inch NPT
Accessories
Hose Type Buna-N Electrically Conductive Discharge Hose
Hose Size 3/4 in. x 12 ft. (3.7 m) 1 in. x 12 ft. (3.7 m) 3/4 in. x 12 ft. (3.7 m)
Manual Nozzle 3/4 inch Unleaded 1 inch Leaded 3/4 inch Unleaded
Automatic Nozzle 3/4 inch Unleaded N/A
Weight
Manual Nozzle 23 lbs. (10.5 kg) 26.5 lbs. (12.0 kg) 23 lbs. (10.5 kg)
Automatic Nozzle 24 lbs. (10.8 kg) 27 lbs. (12.2 kg) N/A