Dalton Park 5pc Dining Set Stock #: BH12-084-499-04 Lot Number: Date Purchased: Date 2014-09-10 Rev. 2 Factory: WOFUVI THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE. STOP DO NOT RETURN THE PRODUCT TO THE STORE; individual stores do not stock parts. If a part is missing or damaged, call our toll-free customer service line. We will gladly ship your replacement parts FREE of charge.
Dalton Park 5pc Dining Set Get Ready! We assembled every piece ourselves to make sure it’s truly easy. ● Please read all the instructions before starting. ● Carefully unpack and identify each part, component, and piece of hardware to make sure you have everything you need for assembly. Lay out each part on a soft, uncluttered surface.
Dalton Park 5pc Dining Set Step 1: HARDWARE PART PART 1 M6x55mm Bolt x 8 ● ● 5 M6 Lock Washer x 8 PART PART 9 6 M6 Flat Washer x 8 Allen Wrench x 1 Unpack the unit and confirm that you have all the hardware and required parts listed. Align and attach the Shelf Frames (D) to the cutouts of Table Legs (C), make certain the aprons on Shelf Frames will face floor after assembly.
Dalton Park 5pc Dining Set Step 2: HARDWARE PART PART 1 M6x55mm Bolt x 4 ● ● 5 M6 Lock Washer x 4 PART 6 PART 9 M6 Flat Washer x 4 Allen Wrench x 1 Stand last assembly upright. Align and attach the Mounting Panels (B) onto the top of Table Legs (C) using four M6x55mm Bolts (1) with Lock Washers & Flat Washers (5 & 6) through the countersunk holes on Mounting Panels into the threaded inserts in Table Legs. Tightly fasten the bolts with enclosed Allen Wrench.
Dalton Park 5pc Dining Set Step 3: HARDWARE PART 2 7 M4 x 25mm Screw x 8 ● ● ● PART Wood Dowel x 2 Position the Table Top (A) upside down on a level & protective surface as shown. Insert 2 Wood Dowels (7) into the middle holes on the Table Top (A). Flip the assembled frame upside down and position the Mounting Panels (B) onto the inserted Wood Dowels.
Dalton Park 5pc Dining Set Step 4: HARDWARE PART M6 x 50mm Bolt x 6 ● ● ● PART 6 4 10 ● PART M4 x 38mm Screw x 4 M6 Flat Washer x 6 Lay the Chair Backrest (E) on a level and protective surface with the threaded inserts facing up. Attach Side Rails (H) onto the Chair Backrest in place with the end wood dowel fully inserted into the hole without threaded inserts. Make sure the pre-drilled slant holes face inward.
Dalton Park 5pc Dining Set Step 5: HARDWARE PART 3 M4 x 32mm Screw x 4 Support surface ● ● ● ● Stand assembled chair upright on a flat surface. Press down Side Rails (H) to even all legs. Now tightly fasten all the Bolts and Screws. Flip last assembly upside down and attach to the bottom of Cushion (F), secure with four M4 x 32mm Screws (3) through the pre-drilled holes on Front Leg Assembly (G) and Side Rails (H). Tighten with Phillips screwdriver. Stand the Chair upright.
Dalton Park 5pc Dining Set Weight limit: 400 lbs. /181.4 kgs. Weight limit: 300 lbs. /136.1 kgs. Weight limit: 100 lbs. /45.4 kgs. Warnings This unit is intended for use only with the maximum weights indicated. Use with products heavier than the maximum weights indicated may result in instability causing possible injury. Care and Maintenance Use a soft, clean cloth that will not scratch the surface when dusting. Use of furniture polish is not necessary.
*BH12-084-499-04-1-TT *BH12-084-499-04-2-TL BH12 084 499 04 3 MP *BH12-084-499-04-3-MP *BH12-084-499-04-4-SP *BH12-084-499-04-5-BR *BH12-084-499-04-6-C *BH12-084-499-04-7-FLA *BH12-084-499-04-8-SR *BH12-084-499-04-9-LSS *BH12-084-499-04-10-RSS Table Top Table Leg Mounting Panel Shelf Backrest Cushion Front Leg Assembly Side Rail Left Side Stretcher Right Side Stretcher *BH12-084-499-04-11-CH *BH12-084-499-04-12-M4x25S *BH12-084-499-04-13-M6x50B BH12 084 499 04 13 M6x50B *BH12-084-499-04-14-M4x32S *BH12-08
Comedor de 5 piezas Dalton Park Número de Producto #: BH12-084-499-04 Número de Lote : Fecha de Compra : Fecha 2014-09-10 Rev. 2 Fábrica : WOFUVI ESTE LIBRO DE INSTRUCCIONES CONTIENE INFORMACIÓN IMPORTANTE DE SEGURIDAD. POR FAVOR LEA Y MANTENGA PARA REFERENCIA FUTURA. ALTO NO RETORNE ESTE PRODUCTO A LA TIENDA; las tiendas no cuentan con partes del producto. Si encuentra que hay partes faltantes o dañadas, llame a nuestro número telefonico gratis de nuestro departamento del servicio del cliente.
Comedor de 5 piezas Dalton Park PREPARESE ! Nosotros ensamblamos cada pieza para asegurarnos que es en realidad fácil. ● ● Por favor lea todo el instructivo antes de comenzar . Cuidadosamente desempaque e identifique cada parte, componente, y pieza de ferretería para cerciorarse que usted tiene todo lo necesario para el ensamblaje. Coloque cada parte en una area suave y ordenada. Cuidado: Incluye partes pequeñas con bordes afilados que pueden ser peligrosas para los niños.
Comedor de 5 piezas Dalton Park Paso 1: MATERIAL DE FERRETERÍA PARTE 1 PARTE 5 Tornillo M6 x 55 mm x 8 Arandela Presión M6 x 8 ● ● PARTE 6 PARTE 9 Arandela Plana M6 x 8 Llave Allen M4 x 1 Recuerde confirmar que cuenta con todas las partes antes de comenzar . Alinear y unir los Entrepaños (D) a los cortes de las Patas de Mesa (C), cerciorarse que los marcos de los entrepaños apuntarán hacia el suelo despues del ensamble.
Comedor de 5 piezas Dalton Park Paso 2: MATERIAL DE FERRETERÍA PARTE PARTE 1 5 Tornillo M6 x 55 mm x 4 Arandela Presión M6 x 4 ● ● PARTE PARTE 9 6 Arandela Plana M6 x 4 Llave Allen M4 x 1 Poner la unidad en pie. Alinear y unir los Paneles de Montaje (B) en la parte superior de las Patas de Mesa (C) usando cuatro Tornillos M6 x 55 mm (1) con las Arandelas (5 y 6) atrávez de los barrenos avellanados de los Panels de Montaje hacia los insertos de las Patas de la Mesa. Usar la Llave Allen proveida.
Comedor de 5 piezas Dalton Park Paso 3: MATERIAL DE FERRETERÍA PARTE 2 7 Tornillo M4 x 25 mm x 8 ● ● ● ● PARTE Perno de Madera x 2 Poner la Mesa (A) boca abajo en una area nivelada y protegida como se muestra. Insertar 2 Pernos de Madera (7) en los agujeros intermedios de la Mesa (A). Gire el ensamble boca abajo y posicione los Panels de Montaje (B) en los pernos de madera insertados.
Comedor de 5 piezas Dalton Park Paso 4: MATERIAL DE FERRETERÍA PARTE Tornillo M6 x 50 mm x 6 ● ● ● PARTE 6 4 10 ● PARTE Tornillo M4 x 38 mm x 4 Arandela Plana M6 x 6 Coloque el Respaldo de Silla (E) en una area limpia con los insertos apuntando hacia arriba. Asegurar los Rieles Laterales (H) en el respaldo asegurandose que los pernos de madera queden completamente insertados en los agujeros sin insertos con rosca. Confirmar que los agujeros rasgados apuntan hacia adentro.
Comedor de 5 piezas Dalton Park Paso 5: MATERIAL DE FERRETERÍA PARTE 3 Tornillo M4 x 32 mm x 4 Area ● ● ● ● Poner the silla en pie en una area plana. Presionar hacia abajo los Rieles Laterales (H) para asegurarse que todas las patas estan niveladas. Ahora apretar todos los tornillos completamente.
Comedor de 5 piezas Dalton Park Limite de peso: 400 lbs. /181.4 kgs. Limite de peso: 300 lbs. /136.1 kgs. Limite de peso: 100 lbs. /45.4 kgs. Cuidados Esta unidad está diseñada para utilizarse sólo con los pesos máximos indicados. Utilizarse con productos más pesados de los indicados puede dar resultado en inestabilidad causando posibles lesiones. Mantenimiento y Cuidados: Use una toalla suave y limpia para evitar daños y rayaduras cuando haga limpieza. Uso de cera para pulir muebles no es necesario.
*BH12-084-499-04-1-TT *BH12-084-499-04-2-TL BH12-084-499-04-3-MP *BH12-084-499-04-3-MP *BH12-084-499-04-4-SP *BH12-084-499-04-5-BR *BH12-084-499-04-6-C *BH12-084-499-04-7-FLA *BH12-084-499-04-8-SR *BH12-084-499-04-9-LSS *BH12-084-499-04-10-RSS Tapa de Mesa Pata de Mesa Panel de Montaje Entrepaño Respaldo de Silla Cojín Ensamble Frontal Silla Riel Lateral Soporte Izquierdo Soporte Derecho *BH12-084-499-04-11-CH *BH12-084-499-04-12-M4x25S *BH12-084-499-04-13-M6x50B BH12-084-499-04-13-M6x50B *BH12-084-499-04