VENDOR STOCK NUMBERS BHAJI-084-099-02-ESPRESSO 8 CUBE STORAGE ORGANIZER BHAJI-084-099-15-WHITE THIS PRODUCT MUST ALWAYS BE MOUNTED TO A TOP PANEL TOP PANEL WALL OR STUD FOR USE. MAXIMUM LOAD MAXIMUM LOAD RECOMMENDED NUMBER OF PEOPLE FOR ASSEMBLY: 1 ESTIMATED ASSEMBLY TIME: 1 HOUR BHAJI-084-099-37-WEATHERED BHAJI-084-099-18-BLACK 100 LB {45.5 KG}) 150 LB (68.2 KG) MAX LOAD 30 LB (13.6 KG) (EACH CUBE) Optional Configuration CALL OUR TOLL FREE NUMBER 1-800-729-1569 FOR FURTHER ASSISTANCE.
A BEFORE STARTING TOOLS NEEDED TO ASSEMBLE Read and understand all the steps carefully before starting. If each step s not followed in the correct order the assembly will be difficult and may result in dosages. Work in a spacious are, preferably on a carpeted surface, near where the unit will be used. Make sure all the parts are included. Most boards are labeled with a removable sticker. Helpful hints Call our toll free number if you need assistance.
Bottomless panel Side panel (Qy: 2) (Qty: Middle shelf Partition board Fixing middle shelf (Qty: 2) (Qty: 4) (Qty: 1) VERIFY THAT ALL PARTS ARE LISTED BEFORE BEGINNING 1-800-729-1569 We are available to assist you Monday -Friday from 9:00 am 5:00 pm Easter Standard Time. USA only.
| @ D Screw bolt Spring washer Washer Cam bolt Cam lock Qty: 8 Qty: 8 Qty: 8 Qty: 4 Qty: Wty N é Wood dowel Safety strap kit Allen key Cap Qty: 30+1 Extra Qty: 1 Qty: 1 Qty: 8 We are available to assist you Monday -Friday VERIFY THAT ALL PARTS ARE LISTED BEFORE BEGINNING pm Eastern Standard Time. USA only.
CAM FASTENING SYSTEM Screw the cam bolt into the prevailed panel. The screw should be tightened so no threads are visible. The larger ring of the cam should touch the panel. Insert the cam lock into the prevailed hole in the panel. The plus and minus signs should be facing the outside of the panel. Connect the previously tightened cam bolt with the panel connected into the cam lock. Using a flat head screw driver, turn the cam lock halfway clockwise to secure the cam bolt.
Insert 4 wood dowels into 1, of the part D partition board. ] Insert 2 owed dowels into 3, of the part D partition boards. 2 Insert with 4 pcs of wood dowel ® at both side. Place dowel on hole. Gently tap with hammer to insert.
Screw the cam bolts into panel B1 with your screw driver. Insert 4 wood dowels into both ends of the E1 board.
Align and attach partition board's to the shelves. Align and attach side panels to the structure and then tighten the cam locks.
Tighten all screw bolts with attached Allen key as shown.
8 Now Your Unit Is Completed Option 1: Fasten the strap (7a) to a stud in the wall using the screw (7d) through washer (7b). Drill a 3/16" diameter hole in the wallboard. Tap the wall anchor {7e) nto the hole unfit 1t is flush. Fasten the strap (7a) to the wall rancher {7e) using the screw (7d) through the washer (7b). \ Quality Guarantee Should this product be defective in workmanship or materials or fail under normal use, we will repair or replace it for up to (1) year from date of purchase.
A ANTES DE COMENZAR HERRAMIENTAS NECESARIAS PARA ENSAMBLAR . Leer y entender todos los pasos cuidadosamente antes de comenzar. si no se sigue cada paso en el orden correcto, el montaje ser difícil y puede ocasionar dacios. . Trabajar en una zona amplia, mejor sobre la alfombra, cerca del sitio donde la unidad se utiliza. . Asegurarse de que todas las piezas estén incluidos. La mayoría de los tableros estén etiquetados con una pegatina re movible. Consejos Otiles . Limar a nuestro minero gratis para ayuda.
Barra arriba/abajo Barra lateral (Cantidad: 2} (Cantidad: 2) I . TED : \. Estante del medio Tabla de tabique Estante del medio para fijación {Cantidad: 2} (Cantidad: 4) {Cantidad: 1) Estamos disponibles para ayudarlo de Lunes Viernes VERIFIQUE QUE TODAS LAS PIEZAS ESTÉN EN LA LISTA ANTES de 9:00 am 5:00 pm Era de la Zona Este. DE COMENZAR 1-800-729-1569 Solé EEU.U.
| @ D Tornillo Arandela elástica Arandela Tornillo de combadura Cerrojo de combadura Cantidad: 8 Cantidad: 8 Cantidad: 8 Cantidad: 4 Cantidad: 4 ® ©@ Clavija de madera Cinturón Lave alelen Tapen Cantidad: 30+1 Extra Cantidad: 1 Cantidad: 1 Cantidad: 8 Estamos disponibles para ayudarlo de Lunes Viernes VERIFIQUE QUE TODAS LAS PIEZAS ESTÉN EN LA LISTA ANTES de 9:00 am 5:00 pm Era de la Zona Este. DE COMENZAR 1-800-729-1569 Solé EEU.U.
SISTEMA DE FIJACIÓN CAM Atornille el Tornillo de combadura en el panel pre taladrado. El tornillo debe apretarse para que no haya roscas visibles. El anillo més grande del cam debe tocar el panel. Inserte el Cerrojo de combadura en el agujero pre taladrado en el panel. Los signos de mds y menos deben estar orientados hacia el exterior del panel. Conecte el Tornillo de combadura previamente apretado con el panel conectado en el Cerrojo de combadura.
tabla de tabique. Insertar 4 clavijas de madera en 1, de las parte D tabla de tabique. Colocar clavija en agujero. Golpear suavemente
Atornillar el cerrojo de [ Insertar 4 clavijas de madera en ambos extremos combadura en el panel B1 de la placa E1.
Alinear y sujetar la table de tabique con los estantes. Por favor de prestar atención a la dirección de las clavijas sobre la table de tabique. 6 Alinear y sujetar la barra lateral con la estructura, y luego apretar el cerrojo de combadura.
8 Ahora Tu Unidad Esté Compuesta Agujero Z Abrochar el cinturón con la pared usando OPCIÓN 1 o 2 como Lustrado. Ciénaga 1: Abrochar el cinturón (7a) con el clave en la pared usando tomillo {7d) a través de arancel (7b). Opción 2: Perforar un agujero de diámetro 3/16"" en la barra. Espitar la ancla de pared (7e) en el agalero hasta que es quede al mismo nivel. Fijar el cinturón (7a) con la ancla de pared {7e) usando el tornillo (7d} a través de la arandela (7b). \ Garantía de Calidad §i ese producto presenta