VENDOR STOCK NUMBERS BHAJI-084-099-05-ESPRESSO BHAJI-084-099-16-BIRCH 3 CUBE ORGANIZER BHAJI-084-099-18-WHITE BHAJI-084-099-18-GRAY BHAJI-084-099-11-WEATHERED BHAJI-084-099-19-PINK BHAJI-084-099-21-BLACK BHAJI-084-098-16-RUSTIC GRAY DO NOT RETURN THE PRODUCT TO THE STORE. INDIVIDUAL STORES DO NOT STOCK PARTS. FOR MISSING OR DAMAGED PARTS CALL 1-800-729-1569. PARTS WILL BE SHIPPED FREE OF CHARGE. TOP PANEL MAXIMUM LOAD TOP PANEL MAXIMUM LOAD FOR PROMPT, RELIABLE SERVICE, PLEASE HAVE 135 LB (61.
3 CUBE ORGANIZER VENDOR STOCK NUMBERS BHAJI-084-099-05-ESPRESSO BHAJI-084-099-16-BIRCH BHAJI-084-099-18-WHITE BHAJI-084-099-18-GRAY BHAJI-084-099-11-WEATHERED BHAJI-084-099-19-PINK BHAJI-084-099-21-BLACK BHAJI-084-098-16-RUSTIC GRAY A BEFORE STARTING TOOLS NEEDED TO ASSEMBLE . Read and understand all the steps carefully before starting. If each step is not followed in the correct order the assembly will be difficult and may result in damages. .
CUBE ORGANIZER VENDOR STOCK NUMBERS BHAJI-084-099-05-ESPRESSO BHAJI-084-099-16-BIRCH BHAJI-084-099-18-WHITE BHAJI-084-099-18-GRAY BHAJI-084-099-11-WEATHERED BHAJI-084-099-19-PINK BHAJI-084-099-21-BLACK BHAJI-084-098-16-RUSTIC GRAY Side panel (Qty: 2) Top/bottom panel (Qty: 2) { Partition board {Qty: 2) VERIFY THAT ALL PARTS ARE LISTED BEFORE BEGINNING We are available to assist you Monday -Friday from 9:00 am 5:00 pm Eastern Standard Time. 1-800-729-1569 USA only.
VENDOR STOCK NUMBERS BHAJI-084-099-05-ESPRESSO BHAJI-084-099-16-BIRCH 3 CUBE ORGANIZER BHAJI-084-099-18-WHITE BHAJI-084-099-18-GRAY BHAJI-084-099-11-WEATHERED BHAJI-084-099-19-PINK BHAJI-084-099-21-BLACK BHAJI-084-098-16-RUSTIC GRAY Resew bolt Spring washer Washer Wood dowel Qty: 8 Qty: 8 Qty: 8 Qty: 16+1 Extra Allen key Safety strap kit Cap Qty: 1 Qty: 1 Qty: 8 We are available to assist you Monday -Friday VERIFY THAT ALL PARTS ARE LISTED BEFORE BEGINNING @ o makings P Eastern Standard Time. USA only.
Insert the wood dowels, Please pay attention to the length of the wood dowels. Don't over hammer the dowels. Align and attach top/bottom panels into partition boards. Insert with 4 pes of wood dowel @ at both side.
Tighten all screw bolts with attached Allen key as shown. Washers need to be used correctly.
Wall Anchor Option: 2 1 / Fasten the safety strap o the wall using OPTION shown Option 1: Fasten the STRAP (6a) 1o a stud in the wall using the screw {6d) through washer {6b) Option 2: Drill @ 3/16" diameter hole in the wallboard. Tap the wall anchor (6} into the hole until it is flush.
ORGANIZADOR DE 3 CUBOS NUMERO DE STOCK DEL VENDEDOR BH14-084-099-05-CAFE EXPRÉS BH15-084-099-16-BIRCH BHUTAN-084-099-18-BLANCO BHUTAN-084-099-18-GRIS BHUTAN-084-099-11-CAPEADO BHUTAN-084-099-19-ROSA BHUTAN-084-099-21-NEGRO BHUTAN-084-098-16-GRIS RUSTICO A ANTES DE COMENZAR HERRAMIENTAS NECESARIAS PARA ENSAMBLAR . Leer y entender todos los pasos cuidadosamente antes de comenzar. si no se sigue cada paso en el orden correcto, el montaje ser difícil y puede ocasionar dacios, .
ORGANIZADOR DE 3 CUBOS NUMERO DE STOCK DEL VENDEDOR BH14-084-099-05-CAFE EXPRÉS BH15-084-099-16-BIRCH BHUTAN-084-099-18-BLANCO BHUTAN-084-099-18-GRIS BHUTAN-084-099-11-CAPEADO BHUTAN-084-099-19-ROSA BHUTAN-084-099-21-NEGRO BHUTAN-084-098-16-GRIS RUSTICO Barra lateral {Cantidad: 2) Barra arriba/abajo {Cantidad: 2) { Tabla de tabique {Cantidad: 2) VERIFIQUE QUE TODAS LAS PIEZAS ESTÉN EN LA LISTA ANTES DE COMENZAR Estamos disponibles para ayudarlo de Lunes Vienes de 9:00 am 5:00 pm Hora de la Zona Este.
Insertar las clavijas de madera. Por favor de prestar atención a la longitud de las clavijas de madera. No clavar demasiado. Insertar 4 clavijas de madera @ en ambos lados. @ x16 | Clavija de madera Alinear y sujetar las barras de arriba y abajo en los estantes de tabique.
x1]) Arancel Tornillo Ancla de pared Opción: 2 v’/ Opción: 1 Abrochar el tinturan con la pared usando OPCIÓN 1 o 2 come Lustrado Opción 1 Abrochar el CINTURÓN {6a) con el clavo en la pared usando tomillo (6d) a través de arancel (6b). Opción 2 l Perforar un irguieran de diámetro 3/16°" en la barra. Espitar la ancla de pared (6e) en el agujero hasta que es quede al mismo nivel. Fijar el cinturón (6a} con la ancla de pared (6e) usando el tornillo) a través de la arandela {6b).