VENDOR STOCK NUMBERS BHAJI-084-098-66-WHITE BHAJI-084-098-63-ESPRESSO BHAJI-084-098-67-GRAY RGA BHAJI-084-098-64-WEATHERED BHAJI-084-098-68-RUSTIC GRAY BHAJI-084-098-65-BLACK BHAJI-084-098-72-PINK THIS PRODUCT MUST ALWAYS BE MOUNTED TO A WALL OR STUD FOR USE. TOP PANEL TOP PANEL Stud /Hole // MAXIMUM LOAD MAXIMUM LOAD r\fi Option: 148 LB (67 KG) /?0\ S Options 1" MAXIMUM LOAD (EACH CUBE) Optional Configuration RECOMMENDED NUMBER OF PEOPLE FOR ASSEMBLY: 1 ESTIMATED ASSEMBLY TIME: 0.
5 CUBE ORGANIZER VENDOR STOCK NUMBERS BHAJI-084-098-66-WHITE BHAJI-084-098-63-ESPRESSO BHAJI-084-098-67-GRAY BHAJI-084-098-64-WEATHERED BHAJI-084-098-68-RUSTIC GRAY BHAJI-084-098-65-BLACK BHAJI-084-098-72-PINK A BEFORE STARTING TOOLS NEEDED TO ASSEMBLE . Read and understand all the steps carefully before starting. If each step is not followed in the correct order the assembly will be difficult and may result in damages. .
VENDOR STOCK NUMBERS BHAJI-084-098-66-WHITE BHAJI-084-098-63-ESPRESSO BHAJI-084-098-67-GRAY BHAJI-084-098-64-WEATHERED BHAJI-084-098-68-RUSTIC GRAY BHAJI-084-098-65-BLACK BHAJI-084-098-72-PINK Top/bottom panel Fixing shelf (Qty: 2) (Qty: 4) Side panel (Qty: 2} We are available to assist you Monday -Friday from 9:00 am 5:00 pm Eastern Standard Time, VERIFY THAT ALL PARTS ARE LISTED BEFORE BEGINNING 1-800-729-1569 USA only.
VENDOR STOCK NUMBERS BHAJI-084-098-66-WHITE BHAJI-084-098-63-ESPRESSO BHAJI-084-098-67-GRAY BHAJI-084-098-64-WEATHERED BHAJI-084-098-68-RUSTIC GRAY BHAJI-084-098-65-BLACK BHAJI-084-098-72-PINK Screw bolt Spring washer Washer Cam bolt Qty: 8 Qty: 8 Qty: 8 Qty: Wood dowel Safety strap kit Allen key Cap Qty: 24+1 Extra Qty: 1 Qty: 1 Qty: 8 We are available to assist you Monday -Friday from 9:00 am 5:00 pm Eastern Standard Time, VERIFY THAT ALL PARTS ARE LISTED BEFORE BEGINNING 1-800-729-1569 USA only.
CUBE ORGANIZER VENDOR STOCK NUMBERS BHAJI-084-098-63-ESPRESSO BHAJI-084-098-64-WEATHERED BHAJI-084-098-65-BLACK BHAJI-084-098-66-WHITE BHAJI-084-098-67-GRAY BHAJI-084-098-68-RUSTIC GRAY BHAJI-084-098-72-PINK CAM FASTENING SYSTEM Screw the cam bolt into the prevailed panel. The screw should be tightened so no threads are visible. The larger ring of the cam should touch the panel. Insert the cam lock into the prevailed hole in the panel. The plus and minus signs should be facing the outside of the panel.
] Place the side panel on a level and protected surface as shown. And then screw in the cam bolts with hand. Insert the wood dowels. Please pay attention to the length of the wood dowels. Don't over hammer the dowels. Insert the cam locks as shown. . approx.
Align and attach shelf boards to the side panel. Align and attach another side panel to the structure and then tighten the cam locks.
1 Align and attach top/bottom panel fo the structure. Tighten all screw bolts with attached Allen key as shown. Washers need to be used correctly as shown. And then fasten the safety strap into top panel.
Safety strap kit Fasten the safety strap to the wall using OPTION shown, Option 1: Fasten the STRAP (7a} to a stud in the wall using the screw (7d) through washer (7b). Option 2: Drill @ 3/16" diameter hole in the wallboard. Tap the wall anchor (7e) into the hole unfit it is flush. Fasten the strap (7¢) fo the wall anchor (7e) using the screw (7d) through the washer (7b).
NUMERO DE STOCK DEL VENDEDOR BHUTAN-084-098-66-BLANCO ORGANIZADOR DE 5 CUBOS asesiiior® miroscomssonsnosnco BHUTAN-084-098-65-NEGRO BHUTAN-084-098-72-ROSA A ANTES DE COMENZAR HERRAMIENTAS NECESARIAS PARA ENSAMBLAR . Leer y entender todos los pasos cuidadosamente antes de comenzar. si no se sigue cada paso en el orden correcto, el montaje ser difícil y puede ocasionar dacios. . Trabajar en una zona amplia, mejor sobre la alfombra, cerca del sitio donde la unidad se utiliza, .
NUMERO DE STOCK DEL VENDEDOR BHUTAN-084-098-66-BLANCO ORGANIZADOR DE 5 CUBOS asesiiian® siroscomsaonsnosnco BHUTAN-084-098-65-NEGRO BHUTAN-084-098-72-ROSA Barra arriba/abajo Estante para filmación (Cantidad: 2) (Cantidad: 4) Barra lateral {Cantidad: 2} Estamos disponibles para ayudarlo de Lunes Viernes VERIFIQUE QUE TODAS LAS PIEZAS ESTÉN EN LA LISTA ANTES de 9:00 am 5:00 pm Hora de |a Zona Este. DE COMENZAR 1-800-729-1569 Solé EEU.U.
NUMERO DE STOCK DEL VENDEDOR BHUTAN-084-098-66-BLANCO ORGANIZADOR DE 5 CUBOS asesiiian® siroscomsaonsnosnco BHUTAN-084-098-65-NEGRO BHUTAN-084-098-72-ROSA s Tomillo Arandela elástica Arandela Tomillo de combadura Cerrojo de combadura Cantidad: 8 Cantidad: 8 Cantidad: 8 Cantidad: 16 Cantidad: 16 © Clavija de madera Cinturón Lave alelen Tapen Cantidad: 24+1 Extra Cantidad: 1 Cantidad: 1 Cantidad: 8 Estamos disponibles para ayudarlo de Lunes Viernes VERIFIQUE QUE TODAS LAS PIEZAS ESTÉN EN LA LISTA ANTES de 9:0
NUMERO DE STOCK DEL VENDEDOR BHUTAN-084-098-66-BLANCO ORGANIZADOR DE 5 CUBOS isusiaanas® mirobrigenses BHUTAN-084-098-64-CAPEADO BHUTAN-084-098-68-GRIS RUSTICO BHUTAN-084-098-65-NEGRO BHUTAN-084-098-72-ROSA 1 SISTEMA DE FIJACIÓN CAM 1. Atornille el Tornillo de combadura en el panel pre taladrado, El tomillo debe apretarse para que ne haya roscas visibles. 2. El anillo més grande del cam debe tocar el panel. 3. Inserte el Cerrojo de combadura en el agujero pre taladrado en el panel.
@ Poner la barra lateral sobre un plano o superficie protegida come ilustrado. Luego tomillar el tomillo de combadura a mano. Insertar las clavijas de madera. Por favor de prestar atención a la longitud de las clavijas de madera. No clavar demasiado. Insertar el cerrojo de combadura con ilustrado.
Alinear y sujetar el estante con la barra lateral. Alinear y sujetar otra barra lateral con la estructura y luego apretar el cerrojo de combadura.
1 Alinear y sujetar la barra arriscabais con la estructura. Sujetar todos los tornillos con llave alelen como ilustrase. Hay que usar la arandela correctamente. Luego abrochar el cinturón con la barra arriba.
Agujero 5 Ahora Tu Unidad Esta Compuesta Abrochar el cinturón con la pared usando OPCIÓN 1 o 2 como ilustrado. Opción 1: Abrochar el cinturón (7a) con el clavo en la pared usando tornillo (7d) a través de arancel (7b). Opción 2: Perforar un agujero de diámetro 3/16° en la barra. Espitar la ancla de pared (7e) en el agujero hasta que es quede al mismo nivel. Filar el cinturón {(7a) con la ancla de pared (7e) usando el tornillero) a través de la arandela (7b).