6 CUBE ORGANIZER VENDOR STOCK NUMBERS BHAJI-084-098-73-ESPRESSO BHAJI-084-098-74-WEATHERED BHAJI-084-098-76-WHITE BHAJI-084-098-77-GRAY BHAJI-084-098-78-RUSTIC GRAY BHAJI-084-098-75-BLACK BHAJI-084-098-82-PINK THIS PRODUCT MUST ALWAYS BE MOUNTED TO A WALL OR STUD FOR USE. TOP PANEL _-Hole B MAXIMUM LOAD 7% v 100 LB {45.5 KG} %79\ Option: 2 "/ 790\ . S/ TOP PANEL MAXIMUM LOAD Option: 1 = Stud 150 LB {68.2 KG) MAXIMUM LOAD 30 LB {13.
6 CUBE ORGANIZER VENDOR STOCK NUMBERS BHAJI-084-098-76-WHITE BHAJI-084-098-73-ESPRESSO BHAJI-084-098-77-GRAY BHAJI-084-098-74-WEATHERED BHAJI-084-098-78-RUSTIC GRAY BHAJI-084-098-75-BLACK BHAJI-084-098-82-PINK A BEFORE STARTING TOOLS NEEDED TO ASSEMBLE . Read and understand all the steps carefully before starting. If each step is not followed in the correct order the assembly will be difficult and may result in damages. .
6 CUBE ORGANIZER VENDOR STOCK NUMBERS BHAJI-084-098-76-WHITE BHAJI-084-098-73-ESPRESSO BHAJI-084-098-77-GRAY BHAJI-084-098-74-WEATHERED BHAJI-084-098-78-RUSTIC GRAY BHAJI-084-098-75-BLACK BHAJI-084-098-82-PINK i Top/bottom panel (Qty: 2) Side panel {Qty: 2) Fixing shelf (Qty: 2) Partition board (Qty: 3) VERIFY THAT ALL PARTS ARE LISTED BEFORE BEGINNING We are available to assist you Monday -Friday from 9:00 am 5:00 pm Eastern Standard Time, 1-800-729-1569 USA only.
VENDOR STOCK NUMBERS BHAJI-084-098-76-WHITE BHAJI-084-098-73-ESPRESSO BHAJI-084-098-77-GRAY BHAJI-084-098-74-WEATHERED BHAJI-084-098-78-RUSTIC GRAY BHAJI-084-098-75-BLACK BHAJI-084-098-82-PINK ' \ Screw bolt Spring washer Washer Cam bolt Qty: 8 Qty: 8 Qty: 8 Qty: 8 ® @ Wood dowel Safety strap kit Allen key Cap Qty: 24+1 Extra Qty: 1 Qty: 1 Qty: 8 We are available to assist you Monday -Friday from 9:00 am 5:00 pm Eastern Standard Time, VERIFY THAT ALL PARTS ARE LISTED BEFORE BEGINNING USA only.
6 CUBE ORGANIZER VENDOR STOCK NUMBERS BHAJI-084-098-76-WHITE BHAJI-084-098-73-ESPRESSO BHAJI-084-098-77-GRAY BHAJI-084-098-74-WEATHERED BHAJI-084-098-78-RUSTIC GRAY BHAJI-084-098-75-BLACK BHAJI-084-098-82-PINK CAM FASTENING SYSTEM Screw the cam bolt into the prevailed panel. The screw should be tightened so no threads are visible. The larger ring of the cam should touch the panel. Insert the eam lock into the prevailed hole in the panel. The plus and minus signs should be facing the outside of the panel.
Insert 4 owed dowels into 1 part D partition boards. both side. Place dowel on hole. Gently tap with hammer to insert. ] Insert 2 wood dowels into 2 part D partition boards.
Align and attach partition board to the shelves. Insert with 4 pes of wood dowel ® at both side. Screw in the cam bolts inch side panel with hand. 2 Please pay attention to the| direction of dowels on the partition board.
Tighten all screw bolts with attached Allen key as shown. Then fasten the safety strap into top panel.
7 Now Your Unit Is Completed \ e Safety strap kit =Y Fasten the safety strap fo the wall using OPTION shown. Option 1: Fasten the strap {7a) to a stud in the wall using the wares (7d) through washer (7b). Option 2: Drill a 3/16" diameter hole in the wallboard. Tap the wall anchormen} into the hole until it is fish, Fasten the strap {7a) to the wall anchor {7e) using the screw (7d) through the washer (7b).
ORGANIZADOR DE 6 CUBOS NUMERO DE STOCK DEL VENDEDOR BHUTAN-084-098-76-BLANCO BH17-084-098-73-CAFE EXPRÉS BHUTAN-084-098-77-GRIS BHUTAN-084-098-74-CAPEADO BHUTAN-084-098-78-GRIS RUSTICO BHUTAN-084-098-75-NEGRO BHUTAN-084-098-82-ROSA A ANTES DE COMENZAR HERRAMIENTAS NECESARIAS PARA ENSAMBLAR . Leer y entender todos los pasos cuidadosamente antes de comenzar. si no se sigue cada paso en el orden correcto, el montaje seré difícil y puede ocasionar dacios, .
NUMERO DE STOCK DEL VENDEDOR BHUTAN-084-098-76-BLANCO ORGANIZADOR DE 6 CUBOS ;7 s crimen .
ORGANIZADOR DE 6 CUBOS NUMERO DE STOCK DEL VENDEDOR BHUTAN-084-098-76-BLANCO BH17-084-098-73-CAFE EXPRÉS BHUTAN-084-098-77-GRIS BHUTAN-084-098-74-CAPEADO BHUTAN-084-098-78-GRIS RUSTICO BHUTAN-084-098-75-NEGRO BHUTAN-084-098-82-ROSA SISTEMA DE FIJACIÓN CAM Atornille el Tornillo de combadura en el panel pre taladrado. El tornillo debe apretarse para que no haya roscas visibles. El anillo més grande del cam debe tocar el panel. Inserte el Cerrojo de combadura en el agujero pre taladrado en el panel.
Insertar 2 clavijas de madera en 2 pedazos de la Parte D tabla de tabique. Insertar 4 clavijas de madera en 1 pedazos de la Parte D tabla de tabique. Colocar clavija en agujero. Golpear suavemente con un martille para insertar. Clavija de madera Insertar con 4 clavijas de madera ® en ambos lados.
Insertar con 4 clavijas de madera ® en ambos lados. Tomillar el cerrojo de combadura en la barra lateral a mano. Alinear y sujetar la table de tabique con los estantes. = @ |x8 ® x8 Atornille de Clavija de madera combadura Por favor de prestar atención a la dirección de las clavijas sobre la table de tabique.
Sujetar todos los tornillos con llave alelen como ilustrado. Luego abrochar el cinturón con la barra arriba.
7 Ahora Tu Unidad Esta Compuesta \ e Cinturón =l Agujero Abrochar el cinturón con la pared usando OPCIÓN 1 o 2 como Lustrado. Pidiéndolo 1: Abrochar el cinturón {7a) con el clavo en la pared usando tomillo (7d} a través de arancel (7b). Opción 2; Perforar un agujero de diámetro 3/16°" en la barra. Espitar la ancla de pared (7e) en el agujero hasta que es quede al mismo nivel. Fijar el enturan { 7a) con la ancla de pared (7e} usando el tomillo (7d) a través de la arandela (7b).