LOT NUMBER: DATE PURCHASED: / / Modern Farmhouse Coffee Table Stock # BH17-084-098-50 # BH17-084-099-99 ADULT ASSEMBLY REQUIRED If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the store where it was purchased. Please call our customer service number and have your instructions and parts list ready to provide the model name, part name or factory number: 866-942-5362 Pacific Standard Time: 8:30 a.m. - 4:30 p.m.
MAXIMUM RECOMMENDED WEIGHT LOADS MANUFACTURER: Whalen Furniture Manufacturing CATALOG: Modern Farmhouse Coffee Table MODEL #: BH17-084-098-50 / BH17-084-099-99 MADE IN CHINA MAXIMUM LOAD 200 lb. (90.8 kg) THIS UNIT IS INTENDED ONLY FOR USE WITHIN THE MAXIMUM WEIGHTS INDICATED. USE WITH LOADS HEAVIER THAN THE MAXIMUM WEIGHTS INDICATED MAY RESULT IN INSTABILITY, CAUSING POSSIBLE INJURY. GENERAL INFORMATION, TIPS AND TRICKS 1. Please read the Assembly Instructions prior to assembling the unit. 2.
Parts and Hardware List Please read completely through the instructions and verify that all listed parts and hardware are present before beginning assembly. A- Top Panel (Qty. 1) B- Stretcher (Qty. 2) (1) 5/16" x 2-1/2" Bolt (Qty. 8+1 extra) (4) 1/4" x 1-1/2" Bolt (Qty. 12+1 extra) C- Side Frame (Qty. 2) (2) Large Lock Washer (Qty. 8+1 extra) (5) Small Lock Washer (Qty. 12+1 extra) (7) Wood Plug (Qty. 8+1 extra) (3) Large Flat Washer (Qty. 8+1 extra) (6) Small Flat Washer (Qty.
Assembly Instructions B 2 3 C 1 C B B C 5/16" x 2-1/2" Bolt (8 used in this step) ① Large Lock Washer (8 used in this step) ② Large Flat Washer (8 used in this step) ③ NOTE: Please do not fully tighten all bolts until you finish assembling all parts. Once assembled, go back and fully tighten all bolts. This will make the assembly easier. 1. Unpack the unit and confirm that you have all the hardware and required parts. 2.
Assembly Instructions C B 4 5 6 C B B/C A A 1/4" x 1-1/2" Bolt (12 used in this step) Small Lock Washer (12 used in this step) Small Flat Washer (12 used in this step) ⑤ ④ ⑥ 3. Place the Top Panel (A) upside down on a level and protective surface with the threaded inserts facing up. 4. Align and attach the previous assembly to the Top Panel (A) with twelve 1-1/2” Bolts (4) and twelve Small Washers (5 and 6). Securely tighten the bolts with the provided 4 mm hex wrench.
Assembly Instructions A C C 7 Wood Plug (8 used in this step) ⑦ 5. Stand the unit upright and position it at the desired location. 6. Cover the countersunk holes on the Legs (C) with the Wood Plugs (7). Gently tap the Wood Plugs (7) with a rubber mallet to ensure they are fully seated.
Care and Maintenance Use a soft, clean cloth that will not scratch the surface when dusting. Use of furniture polish is not necessary. Should you choose to use polish, test first in an inconspicuous area. Using solvents of any kind on your furniture may damage the finish. Never use water to clean your furniture as it may cause damage to the finish. Always use coasters under beverage glasses and flowerpots. Liquid spills should be removed immediately. Using a soft, clean cloth, blot the spill gently.
NÚMERO de LOTE: FECHA de COMPRA: / / Mesa de centro Modern Farmhouse Serie # BH17-084-098-50 # BH17-084-099-99 ENSAMBLE REQUERIDO POR ADULTO Si tienen alguna pregunta acerca del ensamble o si alguna parte está faltante, no retorne esté producto a la tienda donde lo compró. Por favor llame a nuestro departamento de ayuda al cliente teniendo su instructivo y lista de partes para proveer el modelo, nombre de parte o el número de fábrica: 866-942-5362 Hora Estándar del Pacífico: 8:30 a.m. - 4:30 p.m.
MÁXIMO PESO RECOMENDADO FABRICANTE: Whalen Furniture Manufacturing CATALOGO : Mesa de centro Modern Farmhouse MODELO #: BH17-084-098-50 / BH17-084-099-99 HECHO EN CHINA CARGA MÁXIMA 200 lb. (90.8 kg) ESTA UNIDAD DEBE UTILIZARSE CON LOS PESOS MÁXIMOS INDICADOS. SI SE EXEDE EL PESO MÁXIMO, PODRIA RESULTAR EN UNA INESTABILIDAD DE LA UNIDAD CAUSANDO POSIBLES LESIONES. INFORMACIÓN GENERAL, RECOMENDACIONES Y TRUCOS 1. Por favor lea el instructivo antes de comenzar el ensamble. 2.
Lista de partes y material de ferretería Por favor lea completamente las instrucciones y verifique que estén todas las partes antes de iniciar el ensamblado. A- Panel superior (Cant. 1) B- Soporte (Cant. 2) (1) Perno de 5/16" x 2-1/2" (Cant. 8+1 extra) (4) Perno de 1/4" x 1-1/2" (Cant. 12+1 extra) C- Marco lateral (Cant. 2) (2) Arandela de presión grande (Cant. 8+1 extra) (3) Arandela plana grande (Cant. 8+1 extra) (5) Arandela de presión chica (Cant. 12+1 extra) (6) Arandela plana chica (Cant.
Instructivo de ensamble B 2 3 C 1 C B B C Perno de 5/16" x 2-1/2" (8 usados en este paso) ① Arandela de presión grande (8 usados en este paso) ② Arandela plana grande (8 usados en este paso) ③ NOTA: Por favor no apriete completamente todos los pernos, hasta que termine con el ensamble de las partes, después asegúrese de apretar todos los pernos, esto hará el ensamble más fácil. 1. Desempacar la unidad y confirmar que se tiene todo el material de ferretería y partes requeridas. 2.
Instructivo de ensamble C B 4 5 6 C B B/C A A Perno de 1/4" x 1-1/2" (12 usados en este paso) Arandela de presión chica (12 usados en este paso) ⑤ ④ Arandela plana chica (12 usados en este paso) ⑥ 3. Poner el panel superior (A) boca abajo en una superficie nivelada y protegida con los insertos roscados apuntando hacia arriba. 4. Alinear y adjuntar el ensamble previo al panel superior (A) con 12 pernos de 1-1/2” (4) y 12 arandelas chicas (5 y 6). Apretar los pernos con la llave hexagonal de 4 mm.
Instructivo de ensamble A C C 7 Tapón de madera (8 usados en este paso) ⑦ 5. Poner la unidad en posición vertical y en el lugar deseado. 6. Cubrir los agujeros avellanados en las patas (C) con los tapones de madera (7). Golpear ligeramente los tapones de madera (7) con el mazo de goma para asegurar de que esten completamente metidos.
Mantenimiento y Cuidados Use una toalla suave y limpia para evitar daños y rayaduras. Uso de cera para pulir muebles no es necesario. Si desea usar cera, pruebela en un área que no sea visible para revisar su funcionamiento. Usar solventes de cualquier tipo puede dañar el acabado del mueble. Nunca use agua para limpiar la unidad, ya que le puede dañar el acabado. Siempre utilice protección para vasos cuando los ponga sobre la unidad.