Cole brook 4PC Conversation Set Stock# A SRR If you encounter any problems with this product: o DO NOT RETURN IT TO THE STORE o Email: o Call our customer service hot-line at 1877- 877-1235 8:00am 4:00pm (PST), Monday Friday Page 10f19
You must retain the original receipt to obtain warranty service. All structural frames produced from cast and/or tubular aluminum, steel, and wrought Iron. All furniture manufactured and sold by Pas co Enterprises Ltd. is warranted to the original purchaser against defects in workmanship and materials. If a product manufactured by Pas co Enterprises Ltd. fails during the first year from date of purchase under the terms of our limited warranty, Pas co Enterprises Ltd. will replace the item at no charge.
Warranty Exclusions: Products used for commercial, contract, or any other non-residential purposes. Furniture is sold “as is”, display models and/or clearance items. Warranty exclusions include: freight damage, damage due to acts of nature, fire, abuse, vandalism, lack of proper care and maintenance, fading cushions, slings, umbrellas, and coatings. Glass breakage, table top damage, hardware corrosion & rust, freeze damage, and improper assembly are not covered or warranted.
2 Deep Chairs Ref Description Frustration Qty | Ref Description Illustration Qty ‘Washer A Right Arm Nut P . B Left /16" @ 42 Washer Sweatpants Allen Wrench P D Back Panel (114" 1 Hex Wrench P E Base Tom Bracket 12 | B1 Bolt o sn618x11g1) | (mmg ‘Washer Back Cushion (L5T) 4%2 .
’ CAUTION: Read all the instructions before assembly. Failure to do so may result in faulty assembly and potential injury! . Assemble product on a soft, non-abrasive surface such as carpet or cardboard to avoid damaging the item. Two people required to assemble heavy item. After final alignment, make sure all bolts are securely tightened with caps pressed in place. Remove the parts from the carton and take off all protective material.
Step 2 — Assemble left arm (B) to seat panel (C) by using bolt (A3) and washer (G1).
Step 4 Insert seat panel (C) to back panel (D). e .=.5 1= 1.3.“ 3503 3543 DTS 555 A5 3305558 7 % 455533 o &% S Noes 5255 22, 7 555 2 555 3 850% Step 5 — Insert right arm (A) to back panel (D).
Step 6 — Assemble right arm (A} to seat panel (C} by using bolt (A3) and washer (G1). Hardware Used: Bolt (A3) PCs Washer) PCS Step 7 — Assemble left arm (B} to back panel (D} by using bolt (A10} and washer {G2).
Step 8 — Assemble right arm {A) to back panel (D) by using bolt (A10) and washer (G2). Hardware Used: Bolt (A10) PCS Washer) PCS Step 9 — Assemble stem bracket (F) to seat panel (C) by using bolt (B1), nut (15} and washer {G7). Tighten all the bolts and nuts.
Step 10 — Turn over the seat frame and insert it to base (E). (A Step 11 — Put on seat cushion (H) and back cushion (G).
1 Love seat Ref| Description Illustration | Qty | Ref | Description Illustration A | Back Panel L] s .
e, | | | Assembly Instructions CAUTION: Read all the instructions before assembly. Failure to do so may result in faulty assembly and potential injury ® Assemble product on a soft, non-abrasive surface such as carpet or cardboard to avoid damaging the item. & Two people required to assemble heavy item. After final alignment, make sure all bolts are securely tightened with caps pressed in place. & Remove the parts from the carton and take off all protective material.
Step 2 — Assemble right arm (D) to seat panel (B) by using bolt (A3) and washer (G1). Hardware Used: Bolt (A3) PCS Washer) PCS A3 Step 3 — Insert right arm (D) to back panel (A).
Step 4 — Insert seat panel (B} to back panel {A). Step 5 — Assemble left arm (C) to seat panel (B) by using bolt (A3) and washer (G1).
Step 6 — Insert left arm (C) to back panel (A). Step 7 — Assemble right arm (D) to back panel (A) by using bolt (A10) and washer (G2).
Step 8 — Assemble left arm (C) to back panel (A) by using bolt (A10) and washer (G2). Hardware Used: Bolt (A10) PCS Washer) PCS Step 9 — Tum over the love seat frame and put on seat cushion (E) and back cushion (F).
1 Coffee Table Ref | Description Illustration | gty | Ref Description Illustration A | Terrible 1 |a : () B | comer | SUPERUSER | 1| G2 Washer c Table Leg S' 4| ca A"°a D Glass Top < |1 Page 17 of 19
CAUTION: Read all the instructions before assembly. Failure to do so may result in faulty assembly and potential injury! . the item. . securely tightened with caps pressed in place. ® Remove the parts from the carton and take off all protective material. carton against the parts list. Two people required to assemble heavy item.
Step 2 — Assemble table rim (A) to table leg (C) by using bolt (A2) and washer (G2). Hardware Used: Bolt (A2) PCS PCs Washer) T Step 3 — Turn over the table and put on the glass top (D).