Cole brook 3PC Chat Set Stock# If you encounter any problems with this product: o DO NOT RETURN IT TO THE STORE o Email: o Call our customer service hot-line at 1877- 877-1235 8:00am 4:00pm (PST), Monday Friday Pageboy
You must retain the original receipt to obtain warranty service. All structural frames produced from cast and/or tubular aluminum, steel, and wrought Iron. All furniture manufactured and sold by Pas co Enterprises Ltd. is warranted to the original purchaser against defects in workmanship and materials. If a product manufactured by Pas co Enterprises Ltd. fails during the first year from date of purchase under the terms of our limited warranty, Pas co Enterprises Ltd. will replace the item at no charge.
display models and/or clearance items. Warranty exclusions include: freight damage, damage due to acts of nature, fire, abuse, vandalism, lack of proper care and maintenance, fading cushions, slings, umbrellas, and coatings. Glass breakage, table top damage, hardware corrosion & rust, freeze damage, and improper assembly are not covered or warranted. We reserve the right te substitute similar quality and style merchandise/furniture if the model in question is out of stock or production.
2 Deep Chairs Ref Description Castration Qty | Ref Description Illustration Qty ‘Washer Right Arm Nut . » B Left Arm d 2|15 16y @ 42 ‘Washer » C Seat Panel GIT) 4*2 Allen Wrench . D Back Panel Hex Wrench . E Base @ 1%2 D4 (/16" Stem Bracket 12 | B1 Bolt 42 1.181") Back Bolt > S | Cushion D 12 |A8 2 Seat . Bolt .
CAUTION: Read all the instructions before assembly. Failure to do so may result in faulty assembly and potential injury! & Assemble product on a soft, non-abrasive surface such as carpet or cardboard to avoid damaging the item. ® Two people required fo assemble heavy item. After final alignment, make sure all bolts are securely tightened with caps pressed in place. ® Remove the parts from the carton and take off all protective material. Identify all parts packed in the carton against the parts list.
Step 4 — Insert seat panel (C) to back panel (D). e g 535%3 GAR% 2 35553 55 143 Step 5 Insert right arm (A) to back panel (D).
Step 6 — Assemble right arm (A) to seat pans {C) by using bolt (A3) and washer (G1). SIS Hardware Used: Bolt (A3) PCS Washer) PCS Step 7 — Assemblies Sift arm (B} to back panel (D) by using bolt (A10} and washer (G2}.
Step 8 — Assemble right arm (A} to back panel (D) by using bolt {A10) and washer (G2). Hardware Used: Bolt (A10) PCS Washer) PCS Foo G2 AlO Step 9 — Assemble stem bracket (F} fo seat panel (C) by using bolt (B1), nut (15) and washer (G7). Tighten all the bolts and nuts.
Step 10 — Turn over the seat frame and insert it to base(E). Step 11 — Put on seat cushion {H) and back cushion (G).
1 Bistro Table Ref| Description Illustration | Qty | Ref | Description Illustration .
CAUTION: Read all the instructions before assembly. Failure to do so may result in faulty assembly and potential injury ® Assemble product on a soft, non-abrasive surface such as carpet or cardboard to avoid damaging the item. & Two people required to assemble heavy item. After final alignment, make sure all bolts are securely tightened with caps pressed in place. ® Remove the parts from the carton and take off all protective material. Identify all parts packed in the carton against the parts list.
Step 2 — Assemble table rim (A) to table leg {C} by using bolt (A2) and washer {G2). Rep sat this step for the other table leg (C). Hardware Used: Bolt (A2) Washer) PCs PCS LUUUCCCLL L] Step 3 — Turn over the table and put on the glass top {D).