INSTALLATION AND CARE GUIDE G-FLOOR® Questions, problems? Call Better Life Technology, LLC Customer Service 8 a.m. - 5 p.m., CST, Monday - Friday 913-894-0403 WWW.BLTLLC.
Table of Contents Safety Information.....................................2 Care and Cleaning.....................................2 Pre-Installation..........................................3 Installation Methods...............................3 Preparing for Installation........................3 Tools Required........................................3 Installation.................................................
Pre-Installation INSTALLATION METHODS □□ Free-floating Installation: Roll it out and trim to fit. □□ Tape or Glue Optional Installation: Roll it out and trim to fit. Use an acrylic-based, double-sided tape, such as Roberts® MaxGrip™, at the edges and along the seams or, for full glue down option, use an acrylic based vinyl adhesive such as Roberts® MaxGrip™ 2310 or 2315 sheet vinyl adhesive. PREPARING FOR INSTALLATION □□ Sweep the floor clean of debris. Wipe up any oil and chemicals from the floor.
Installation 1 Placing the flooring □□ For best results, start unrolling at the entrance; finishing at the back. Using a wide push broom, push any air out from center and work your way outward, side-to-side and length-to-length. Depending on the temperature, product may expand or contract somewhat during this process. It is OK to park your car on the flooring during this time.
