Instructions / Assembly

12
Figure 4
BENCH HEAT EMITTER
Cut-Outs
Figure 5 Front of Sauna Room
B. Understanding The Wall Panels
The REAR WALL PANEL will have 2 carbon heat emitter panels (3 carbon heat emitter panels
on the 3 person model) and both SIDE WALL PANELS will have (1) carbon heat emitter panel
each (2 carbon heat emitter panels on the 2 and 3 person models). The REAR WALL PANEL and
SIDE WALL PANELS will have heater cords coming from the top of each wall panel which will be
connected on the roof once the ROOF PANEL is placed on top. The buckles on the REAR WALL
PANEL will connect with the SIDE WALL PANELS. The FRONT WALL PANEL has the front
glass door. It will have the “CTRL” wire harness coming from the top of the FRONT WALL
PANEL which will also be connected on the roof once the ROOF PANEL is placed on top. On
model 3106, the wall panels will have moldings that face inward to the interior of the sauna room.
These moldings will hold the ROOF Panel into place once it is place on top of the sauna room.
(see Figure 6 and Figure 7)
Figure 7
Figure 6