Instructions / Assembly

B. Installing the FLOOR PANEL

1. Place the FLOOR PANEL on the floor. Some models have wood braces that must be

installed on the underside of the FLOOR PANEL. Please check to see if such wood

braces were packed in the box containing the FLOOR PANEL. If so, mount according to the

designated labels located on the underside of the FLOOR PANEL. Once installed, turn the

FLOOR PANEL right side up. Make sure the front side of the FLOOR PANEL is facing the

correct direction. (see Panel Descriptions) (see Figure 9)

BENCH HEAT EMITTER

Cut Outs

Wood Guide Inserts

Figure 9 Front of Sauna Room

C. Installing the REAR PANEL and LEFT SIDE WALL PANEL

1. Remove the protection paper from the buckles. Place the REAR WALL PANEL onto the

FLOOR PANEL against the wood guide inserts. While one adult is holding the REAR WALL

PANEL upright, another adult will place the LEFT SIDE WALL PANEL onto the floor and

adjacent to the REAR WALL PANEL. Next, attach the REAR WALL PANEL to the LEFT

SIDE WALL PANEL and use the buckle to latch together. (see Figure 10 and Figure 11)

Figure 10 Figure 11

D. Installing the RIGHT SIDE WALL PANEL

1. Now place the RIGHT SIDE WALL PANEL onto the floor against the guide inserts on the

FLOOR PANEL. Align the RIGHT SIDE WALL PANEL with the REAR WALL PANEL and

buckle together. (see Figure 12)