Manualshelf

Instructions / Assembly

ManualsBrandsBetter Life ManualsKitchen2-Person Far Infrared Healthy Living Carbon Sauna with 7 Year Warranty Chromotherapy CD/Radio with MP3 connection
11121314151617181920
15
Figure 12
E. Installing the FRONT WALL PANEL with GLASS DOOR
1. Place the FRONT WALL PANEL onto the FLOOR PANEL. Align the Buckles on the FRONT
WALL PANEL and the LEFT SIDE WALL PANEL. Then latch the Buckle shut. Do the same
for the RIGHT SIDE WALL PANEL. (see Figure 13)
Figure 13
F. Installing the BENCH HEAT EMITTER PANEL, BENCH, and FLOOR HEAT EMITTER PANEL
1. Installing the FLOOR HEAT EMITTER PANEL can be done by laying it down on the FLOOR
PANEL. Some sauna models have the floor heater already installed in the FLOOR PANEL.
The cord will be on the left side of the sauna room and will plug into the inlet on the left side of
the REAR WALL PANEL.
2. Installing the BENCH HEAT EMITTER PANEL can be done by sliding it downward (using the
guides of the wall panels) and into the cut outs on the FLOOR PANEL. Make sure the cord
from the FLOOR HEAT EMITTER PANEL fits through the cut out on the bottom of the BENCH
HEAT EMITTER PANEL to avoid pinching the cord.
3. Install the BENCH at an angle and slide it over the horizontal bench guides on the side
panels. Slide the BENCH all the way in and against the REAR WALL PANEL. Make sure to
install the BENCH with the smooth and finished side facing upward. (see Figure 14, Figure
15, and Figure 16)