Instructions / Assembly

17
Figure 17 Figure 18 Figure 19
I. Installing the TEMPERATURE SENSOR
1. Enter the sauna and remove the protective covering (masking tape) from the TEMPERATURE
SENSOR. Situate the TEMPERATURE SENSOR so that it is vertical and pointing downward.
(see Figure 20)
Figure 20
Note: Some sauna models are shipped with a spare TEMPERATURE SENSOR in case the
TEMPERATURE SENSOR is damaged during transit. The manufacturer decides this
according to sauna models and packaging.
J. Putting on the ROOF COVER
1. Place the ROOF COVER over the top of the sauna. Be cautious when pulling the power cord
through the hole in the roof cover. Gently place the ROOF COVER onto the ROOF PANEL.
When the edges are aligned, screw the ROOF COVER to the roof panel. (see Figure 21)
Figure 21