How to Guide

III. Buckles

A. External Buckles

The external buckles are used to connect the REAR WALL PANEL to the LEFT SIDE WALL

PANEL and RIGHT SIDE WALL PANEL. The Metal Guide Insert Brackets connect the FRONT

WALL PANEL to the LEFT SIDE WALL PANEL and RIGHT SIDE WALL PANEL. (see Figure 2

and 2a)

Figure 2 Figure 2a

B. Wood Guide Inserts on the Floor Panel

The FLOOR HEAT EMITTER PANEL is located towards the front of the sauna room. The arrows

in Figure 3 below are indicating where the wall panels will be placed up onto the FLOOR

PANEL. (see Figure 3)

Figure 3

IV. Panel Descriptions

For easier installation, please understand and distinguish the differences between each panel.

A. Floor Panel

Some models have wood braces that must be installed on the underside of the FLOOR

PANEL before assembling the sauna room. (see Figure 4 below) When you place the

FLOOR PANEL at its designated location, leave enough space so that you are able to move

around the FLOOR PANEL in order to install the sauna wall panels. To identify the front of the

FLOOR PANEL, see the diagram below. (see Figure 5 below)